5秒后页面跳转
LM2747 PDF预览

LM2747

更新时间: 2024-11-25 11:34:19
品牌 Logo 应用领域
美国国家半导体 - NSC 控制器时钟
页数 文件大小 规格书
23页 1006K
描述
Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization

LM2747 数据手册

 浏览型号LM2747的Datasheet PDF文件第2页浏览型号LM2747的Datasheet PDF文件第3页浏览型号LM2747的Datasheet PDF文件第4页浏览型号LM2747的Datasheet PDF文件第5页浏览型号LM2747的Datasheet PDF文件第6页浏览型号LM2747的Datasheet PDF文件第7页 
March 2006  
LM2747  
Synchronous Buck Controller with Pre-bias Startup, and  
Optional Clock Synchronization  
General Description  
Features  
n
1% feedback voltage accuracy over temperature  
The LM2747 is a high-speed synchronous buck regulator  
controller with a feedback voltage accuracy of 1%. It can  
provide simple down conversion to output voltages as low as  
0.6V. Though the control section of the IC is rated for 3 to 6V,  
the driver section is designed to accept input supply rails as  
high as 14V. The use of adaptive non-overlapping MOSFET  
gate drivers helps avoid potential shoot-through problems  
while maintaining high efficiency. The IC is designed for the  
more cost-effective option of driving only N-channel MOS-  
FETs in both the high-side and low-side positions. It senses  
the low-side switch voltage drop for providing a simple,  
adjustable current limit.  
n Switching frequency from 50 kHz to 1 MHz  
n Switching frequency synchronize range 250 kHz to 1  
MHz  
n Startup with a pre-biased output load  
n Power stage input voltage from 1V to 14V  
n Control stage input voltage from 3V to 6V  
n Output voltage adjustable down to 0.6V  
n Power Good flag and shutdown  
n Output overvoltage and undervoltage detection  
n Low-side adjustable current sensing  
n Adjustable soft-start  
The LM2747 features a fixed-frequency voltage-mode PWM  
control architecture which is adjustable from 50 kHz to 1  
MHz with one external resistor. In addition, the LM2747 also  
allows the switching frequency to be synchronized to an  
external clock signal over the range of 250 kHz to 1 MHz.  
This wide range of switching frequency gives the power  
supply designer the flexibility to make better tradeoffs be-  
tween component size, cost and efficiency.  
n Tracking and sequencing with shutdown and soft start  
pins  
n TSSOP-14 package  
Applications  
n Down Conversion from 3.3V  
n Cable Modem, DSL and ADSL  
n Laser Jet and Ink Jet Printers  
n Low Voltage Power Modules  
n DSP, ASIC, Core and I/O  
Features include the ability to startup with a pre-biased load  
on the output, soft-start, input undervoltage lockout (UVLO)  
and Power Good (based on both undervoltage and overvolt-  
age detection). In addition, the shutdown pin of the IC can be  
used for providing startup delay, and the soft-start pin can be  
used for implementing precise tracking, for the purpose of  
sequencing with respect to an external rail.  
Typical Application  
20150901  
© 2006 National Semiconductor Corporation  
DS201509  
www.national.com  

与LM2747相关器件

型号 品牌 获取价格 描述 数据表
LM2747_15 TI

获取价格

Synchronous Buck Controller with Pre-Bias Startup, and Optional Clock Synchronization
LM2747MTC NSC

获取价格

Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization
LM2747MTC/NOPB TI

获取价格

Synchronous Buck Controller with Pre-Bias Startup, and Optional Clock Synchronization
LM2747MTCX NSC

获取价格

Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization
LM2747MTCX/NOPB TI

获取价格

Synchronous Buck Controller with Pre-Bias Startup, and Optional Clock Synchronization
LM2748 TI

获取价格

LM2745 / LM2748 Synchronous Buck Controller with Pre-Bias Startup, and Optional Clock
LM2748 NSC

获取价格

Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization
LM2748MTC NSC

获取价格

Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization
LM2748MTC TI

获取价格

LM2745 / LM2748 Synchronous Buck Controller with Pre-Bias Startup
LM2748MTC/NOPB TI

获取价格

LM2745 / LM2748 Synchronous Buck Controller with Pre-Bias Startup