5秒后页面跳转
LM26LV_08 PDF预览

LM26LV_08

更新时间: 2024-11-22 04:44:35
品牌 Logo 应用领域
美国国家半导体 - NSC 开关传感器温度传感器
页数 文件大小 规格书
20页 546K
描述
1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor

LM26LV_08 数据手册

 浏览型号LM26LV_08的Datasheet PDF文件第2页浏览型号LM26LV_08的Datasheet PDF文件第3页浏览型号LM26LV_08的Datasheet PDF文件第4页浏览型号LM26LV_08的Datasheet PDF文件第5页浏览型号LM26LV_08的Datasheet PDF文件第6页浏览型号LM26LV_08的Datasheet PDF文件第7页 
May 16, 2008  
LM26LV  
1.6 V, LLP-6 Factory Preset Temperature Switch and  
Temperature Sensor  
Automotive  
General Description  
Disk Drives  
The LM26LV is a low-voltage, precision, dual-output, low-  
Games  
power temperature switch and temperature sensor. The tem-  
perature trip point (TTRIP) can be preset at the factory to any  
temperature in the range of 0°C to 150°C in 1°C increments.  
Built-in temperature hysteresis (THYST) keeps the output sta-  
ble in an environment of temperature instability.  
Appliances  
Features  
Low 1.6V operation  
In normal operation the LM26LV temperature switch outputs  
assert when the die temperature exceeds TTRIP. The temper-  
ature switch outputs will reset when the temperature falls  
Low quiescent current  
Push-pull and open-drain temperature switch outputs  
Wide trip point range of 0°C to 150°C  
below  
a temperature equal to (TTRIP − THYST). The  
OVERTEMP digital output, is active-high with a push-pull  
structure, while the OVERTEMP digital output, is active-low  
with an open-drain structure.  
Very linear analog VTEMP temperature sensor output  
VTEMP output short-circuit protected  
Accurate over −50°C to 150°C temperature range  
An analog output, VTEMP, delivers an analog output voltage  
which is inversely proportional to the measured temperature.  
2.2 mm by 2.5 mm (typ) LLP-6 package  
Excellent power supply noise rejection  
Driving the TRIP TEST input high: (1) causes the digital out-  
puts to be asserted for in-situ verification and, (2) causes the  
threshold voltage to appear at the VTEMP output pin, which  
could be used to verify the temperature trip point.  
Key Specifications  
Supply Voltage  
Supply Current  
Accuracy, Trip Point  
Temperature  
1.6V to 5.5V  
The LM26LV's low minimum supply voltage makes it ideal for  
1.8 Volt system designs. Its wide operating range, low supply  
current , and excellent accuracy provide a temperature switch  
solution for a wide range of commercial and industrial appli-  
cations.  
8 μA (typ)  
0°C to 150°C  
±2.2°C  
0°C to 150°C  
0°C to 120°C  
−50°C to 0°C  
±2.3°C  
±2.2°C  
±1.7°C  
Accuracy, VTEMP  
Applications  
Cell phones  
VTEMP Output Drive  
Operating Temperature  
Hysteresis Temperature  
±100 μA  
Wireless Transceivers  
−50°C to 150°C  
4.5°C to 5.5°C  
Digital Cameras  
Personal Digital Assistants (PDA's)  
Battery Management  
Connection Diagram  
Typical Transfer Characteristic  
LLP-6  
VTEMP Analog Voltage vs Die Temperature  
20204701  
Top View  
See NS Package Number SDB06A  
20204724  
© 2008 National Semiconductor Corporation  
202047  
www.national.com  

与LM26LV_08相关器件

型号 品牌 获取价格 描述 数据表
LM26LVCISD NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-050 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-050/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISD-060 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-060/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISD-065 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-065/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISD-070 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-070/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISD-075 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor