5秒后页面跳转
LM26LVCISD-060/NOPB PDF预览

LM26LVCISD-060/NOPB

更新时间: 2024-11-20 11:08:11
品牌 Logo 应用领域
德州仪器 - TI 开关传感器换能器
页数 文件大小 规格书
33页 1664K
描述
具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF | 6 | -40 to 150

LM26LVCISD-060/NOPB 数据手册

 浏览型号LM26LVCISD-060/NOPB的Datasheet PDF文件第2页浏览型号LM26LVCISD-060/NOPB的Datasheet PDF文件第3页浏览型号LM26LVCISD-060/NOPB的Datasheet PDF文件第4页浏览型号LM26LVCISD-060/NOPB的Datasheet PDF文件第5页浏览型号LM26LVCISD-060/NOPB的Datasheet PDF文件第6页浏览型号LM26LVCISD-060/NOPB的Datasheet PDF文件第7页 
LM26LV  
www.ti.com  
SNIS144F JULY 2007REVISED FEBRUARY 2013  
LM26LV/LM26LV-Q1 1.6 V, WSON-6 Factory Preset Temperature Switch and Temperature  
Sensor  
Check for Samples: LM26LV  
1
FEATURES  
DESCRIPTION  
The LM26LV/LM26LV-Q1 is a low-voltage, precision,  
dual-output, low-power temperature switch and  
temperature sensor. The temperature trip point  
2
Low 1.6V Operation  
Low Quiescent Current  
Latching Function: Device Can Latch the Over  
Temperature Condition  
(TTRIP  
temperature in the range of 0°C to 150°C in 1°C  
increments. Built-in temperature hysteresis (THYST  
) can be preset at the factory to any  
)
Push-Pull and Open-Drain Temperature Switch  
Outputs  
keeps the output stable in an environment of  
temperature instability.  
Wide Trip Point Range of 0°C to 150°C  
In normal operation the LM26LV/LM26LV-Q1  
temperature switch outputs assert when the die  
temperature exceeds TTRIP. The temperature switch  
outputs will reset when the temperature falls below a  
Very Linear Analog VTEMP Temperature Sensor  
Output  
VTEMP Output Short-Circuit Protected  
temperature equal to (TTRIP  
THYST). The  
Accurate Over 50°C to 150°C Temperature  
Range  
OVERTEMP digital output, is active-high with a push-  
pull structure, while the OVERTEMP digital output, is  
active-low with an open-drain structure.  
2.2 mm by 2.5 mm (typ) WSON-6 Package  
Excellent Power Supply Noise Rejection  
The analog output, VTEMP, delivers an analog output  
voltage with Negative Temperature Coefficient (NTC).  
LM26LVQISD–130 and LM26LVQISD-135 are  
AEC-Q100 Grade 0 Qualified and are  
Manufactured on an Automotive Grade Flow.  
For Other Trip Points, Contact Your Sales  
Office.  
Driving the TRIP TEST input high: (1) causes the  
digital outputs to be asserted for in-situ verification  
and, (2) causes the threshold voltage to appear at the  
VTEMP output pin, which could be used to verify the  
temperature trip point.  
APPLICATIONS  
The LM26LV/LM26LV-Q1's low minimum supply  
voltage makes it ideal for 1.8 Volt system designs. Its  
wide operating range, low supply current, and  
excellent accuracy provide a temperature switch  
solution for a wide range of commercial and industrial  
applications.  
Cell Phones and Wireless Transceivers  
Digital Cameras  
Battery Management  
Automotive  
Disk Drives  
Games and Appliances  
Key Specifications  
Supply Voltage  
1.6V to 5.5V  
Supply Current  
8 μA (typ)  
Accuracy, Trip Point Temperature  
0°C to 150°C  
0°C to 150°C  
0°C to 120°C  
50°C to 0°C  
±2.2°C  
±2.3°C  
Accuracy, VTEMP  
±2.2°C  
±1.7°C  
VTEMP Output Drive  
±100 μA  
Operating Temperature  
Hysteresis Temperature  
50°C to 150°C  
4.5°C to 5.5°C  
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
All trademarks are the property of their respective owners.  
2
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  
Copyright © 2007–2013, Texas Instruments Incorporated  

LM26LVCISD-060/NOPB 替代型号

型号 品牌 替代类型 描述 数据表
LM26LVCISDX-060/NOPB TI

类似代替

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |

与LM26LVCISD-060/NOPB相关器件

型号 品牌 获取价格 描述 数据表
LM26LVCISD-065 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-065/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISD-070 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-070/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISD-075 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-075/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISD-080 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-080/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |
LM26LVCISD-085 NSC

获取价格

1.6 V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor
LM26LVCISD-085/NOPB TI

获取价格

具有模拟输出的 ±3°C 1.6V 至 5.5V、出厂预设跳变点温度开关 | NGF |