Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM22675, LM22675-Q1
SNVS591L –SEPTEMBER 2008–REVISED NOVEMBER 2014
®
LM22675/-Q1 42 V, 1 A SIMPLE SWITCHER Step-Down Voltage Regulator
with Features
1 Features
3 Description
The LM22675 switching regulator provides all of the
functions necessary to implement an efficient high
voltage step-down (buck) regulator using a minimum
of external components. This easy to use regulator
incorporates a 42 V N-channel MOSFET switch
capable of providing up to 1 A of load current.
Excellent line and load regulation along with high
efficiency (> 90%) are featured. Voltage mode control
offers short minimum on-time, allowing the widest
ratio between input and output voltages. Internal loop
compensation means that the user is free from the
tedious task of calculating the loop compensation
components. Fixed 5 V output and adjustable output
voltage options are available. A switching frequency
of 500 kHz allows for small external components and
good transient response. A precision enable input
allows simplification of regulator control and system
power sequencing. In shutdown mode the regulator
draws only 25 µA (typ). Built in soft-start (500 µs, typ)
saves external components. The LM22675 also has
built in thermal shutdown, and current limiting to
protect against accidental overloads.
1
•
Wide Input Voltage Range: 4.5 V to 42 V
Internally Compensated Voltage Mode Control
Stable with Low ESR Ceramic Capacitors
200 mΩ N-Channel MOSFET
•
•
•
•
Output Voltage Options:
-ADJ (Outputs as Low as 1.285 V)
-5.0 (Output Fixed to 5 V)
•
•
•
±1.5% Feedback Reference Accuracy
Switching Frequency of 500 kHz
–40°C to 125°C Operating Junction Temperature
Range
•
•
•
•
•
•
Precision Enable Pin
Integrated Boot-Strap Diode
Integrated Soft-Start
Fully WEBENCH® Enabled
Step-Down and Inverting Buck-Boost Applications
LM22675Q is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Operating Junction Temperature)
The LM22675 is a member of Texas Instruments'
SIMPLE
SWITCHER®
family.
The
SIMPLE
•
SO PowerPAD-8 (Exposed Pad) Package
SWITCHER concept provides for an easy to use
complete design using a minimum number of external
components and the TI WEBENCH design tool. TI's
WEBENCH tool includes features such as external
component calculation, electrical simulation, thermal
simulation, and Build-It boards for easy design-in.
2 Applications
•
•
•
•
Industrial Control
Telecom and Datacom Systems
Embedded Systems
Device Information(1)
Conversions from Standard 24 V, 12 V and 5 V
Input Rails
PART NUMBER
LM22675
PACKAGE
BODY SIZE (NOM)
HSOP (8)
4.89 mm x 3.90 mm
LM22675-Q1
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Application Schematic
VIN
VIN
FB
BOOT
SW
LM22675-ADJ
VOUT
EN
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.