Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM22674, LM22674-Q1
SNVS590M –SEPTEMBER 2008–REVISED NOVEMBER 2014
®
LM22674/-Q1 42 V, 500 mA SIMPLE SWITCHER Step-Down Voltage Regulator
with Features
1 Features
3 Description
The LM22674 switching regulator provides all of the
functions necessary to implement an efficient high
voltage step-down (buck) regulator using a minimum
of external components. This easy to use regulator
incorporates a 42 V N-channel MOSFET switch
capable of providing up to 500 mA of load current.
Excellent line and load regulation along with high
efficiency (> 90%) are featured. Voltage mode control
offers short minimum on-time, allowing the widest
ratio between input and output voltages. Internal loop
compensation means that the user is free from the
tedious task of calculating the loop compensation
components. Fixed 5 V output and adjustable output
voltage options are available. A switching frequency
of 500 kHz allows for small external components and
good transient response. A precision enable input
allows simplification of regulator control and system
power sequencing. In shutdown mode the regulator
draws only 25 µA (typ). Built in soft-start (500 µs, typ)
saves external components. The LM22674 also has
built in thermal shutdown, and current limiting to
protect against accidental overloads.
1
•
Wide Input Voltage Range: 4.5 V to 42 V
Internally Compensated Voltage Mode Control
Stable with Low ESR Ceramic Capacitors
200 mΩ N-Channel MOSFET
•
•
•
•
Output Voltage Options:
-ADJ (Outputs as Low as 1.285 V)
-5.0 (Output Fixed to 5 V)
•
•
•
±1.5% Feedback Reference Accuracy
Switching Frequency of 500 kHz
–40°C to 125°C Operating Junction Temperature
Range
•
•
•
•
•
Precision Enable Pin
Integrated Boot-Strap Diode
Integrated Soft-Start
Fully WEBENCH® Enabled
LM22674-Q1 is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Operating Junction Temperature)
•
SO PowerPAD (Exposed Pad)
The LM22674 device is
a member of Texas
Instruments' SIMPLE SWITCHER® family. The
SIMPLE SWITCHER® concept provides for an easy
to use complete design using a minimum number of
external components and the TI WEBENCH® design
tool. TI's WEBENCH® tool includes features such as
external component calculation, electrical simulation,
thermal simulation, and Build-It boards for easy
design-in.
2 Applications
•
•
•
•
Industrial Control
Telecom and Datacom Systems
Embedded Systems
Conversions from Standard 24 V, 12 V and 5 V
Input Rails
Device Information(1)
PART NUMBER
LM22674
PACKAGE
BODY SIZE (NOM)
HSOP (8)
4.89 mm x 3.90 mm
LM22674-Q1
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Application Schematic
VIN
VIN
FB
BOOT
SW
LM22674-ADJ
VOUT
EN
GND
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.