Sample &
Buy
Support &
Community
Product
Folder
Tools &
Software
Technical
Documents
LM22672, LM22672-Q1
SNVS588M –SEPTEMBER 2008–REVISED NOVEMBER 2014
®
LM22672/-Q1 42-V, 1-A SIMPLE SWITCHER Step-Down Voltage Regulator
with Features
1 Features
3 Description
The LM22672 switching regulator provides all of the
functions necessary to implement an efficient high
voltage step-down (buck) regulator using a minimum
of external components. This easy to use regulator
incorporates a 42 V N-channel MOSFET switch
capable of providing up to 1 A of load current.
Excellent line and load regulation along with high
efficiency (> 90%) are featured. Voltage mode control
offers short minimum on-time, allowing the widest
ratio between input and output voltages. Internal loop
compensation means that the user is free from the
tedious task of calculating the loop compensation
components. Fixed 5 V output and adjustable output
voltage options are available.
1
•
Wide Input Voltage Range: 4.5 V to 42 V
Internally Compensated Voltage Mode Control
Stable with Low ESR Ceramic Capacitors
200 mΩ N-Channel MOSFET
•
•
•
•
Output Voltage Options:
-ADJ (Outputs as Low as 1.285 V)
-5.0 (Output Fixed to 5 V)
•
•
•
±1.5% Feedback Reference Accuracy
500 kHz Default Switching Frequency
Adjustable Switching Frequency and
Synchronization
•
•
•
•
•
•
–40°C to 125°C Junction Temperature Range
Precision Enable Input
The default switching frequency is set at 500 kHz
allowing for small external components and good
transient response. In addition, the frequency can be
adjusted over a range of 200 kHz to 1 MHz with a
single external resistor. The internal oscillator can be
synchronized to a system clock or to the oscillator of
another regulator. A precision enable input allows
simplification of regulator control and system power
sequencing. In shutdown mode the regulator draws
only 25 µA (typ). An adjustable soft-start feature is
provided through the selection of a single external
capacitor. The LM22672 also has built in thermal
shutdown, and current limiting to protect against
accidental overloads.
Integrated Boot-Strap Diode
Adjustable Soft-Start
Fully WEBENCH® Enabled
LM22672-Q1 is an Automotive Grade Product
that is AEC-Q100 Grade 1 Qualified (–40°C to
+125°C Junction Temperature)
•
SO PowerPAD (Exposed Pad)
2 Applications
•
•
•
•
Industrial Control
Telecom and Datacom Systems
Embedded Systems
The LM22672 is a member of Texas Instruments'
SIMPLE
SWITCHER®
family.
The
SIMPLE
SWITCHER® concept provides for an easy to use
complete design using a minimum number of external
components and the TI WEBENCH® design tool. TI's
WEBENCH® tool includes features such as external
component calculation, electrical simulation, thermal
simulation, and Build-It boards for easy design-in.
Conversions from Standard 24 V, 12 V and 5 V
Input Rails
Simplified Application Schematic
VIN
FB
BOOT
SW
VIN
Device Information(1)
LM22672-ADJ
VOUT
PART NUMBER
PACKAGE
BODY SIZE (NOM)
RT/SYNC SS EN GND
LM22672,
LM22672-Q1
HSOP (8)
4.89 mm x 3.90 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.