LH1505AB, LH1505AAC, LH1505AACTR
www.vishay.com
Vishay Semiconductors
Dual 1 Form A Solid-State Relay
FEATURES
DIP
S1
S1'
• Two independent relays
• Current limit protection
• Isolation test voltage 5300 VRMS
• Typical RON 15
S2
S2'
• Load voltage 250 V
• Load current 120 mA
S1
S1' S2
S2'
5
8
7
6
SMD
• High surge capability
• Clean bounce free switching
• Low power consumption
• High reliability monolithic receptor
• SMD lead available on tape and reel
i179034_9
i179034_2
1
2
3
4
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
V
D
E
DESCRIPTION
APPLICATIONS
• General telecom switching
- On/off hook control
- Ring delay
The LH1505 contains two normally open switches that can
be used as two independent SPST relays or as one DPST
relay. The relay is constructed using a GaAlAs LED for
actuation control and integrated monolithic dies for the
switch outputs. The die, fabricated in a high-voltage
- Dial pulse
dielectrically isolated technology, is comprised of
a
- Ground start
photodiode array, switch control circuity, and DMOS
switches. In addition, the LH1505 relay employs current
limiting circuitry, enabling it to pass lightning surge testing
as per ANSI/TIA-968-B and other regulatory voltage surge
requirements when overvoltage protection is provided.
- Ground fault protection
• Instrumentation
• Industrial controls
AGENCY APPROVALS
UL1577:
file no. E52744 system code H, double
protection
CSA:
certification no. 093751
BSI/BABT: certification no. 7980
DIN EN:
60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
approval
FIMKO:
ORDERING INFORMATION
SMD
DIP
L
H
1
5
0
5
A
#
#
T
R
ELECTR.
VARIATION
PACKAGE
CONFIG.
TAPE AND
REEL
> 0.1 mm
7.62 mm
PART NUMBER
PACKAGE
UL, CSA, BSI, FIMKO
LH1505AAC
SMD-8, tubes
SMD-8, tape and reel
DIP-8, tubes
LH1505AACTR
LH1505AB
Rev. 1.6, 25-Jul-11
Document Number: 83809
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000