Features:
• Used in the rework and repair of printed circuit boards, computers, cell phones,
or other electronics
• Easily removes solder from components or pads on a circuit board
• Concentrated fine copper braiding utilizes less length of wick for each
desoldering application
• Made of clean, oxide-free copper wire
• Tight weave enables quick “on and off” desoldering
• Formulated with a flux designed for higher activation temperatures
• To be used in conjunction with processes using RMA type no-clean fluxes
• 5’ and 10’ lengths available on static dissipative bobbins in compliance with
ESD Association Standard
• Leaves a residue that is environmentally safe
• Uses flux classification type L0 per IPC J-STD-004B
Wire Specifications:
Wire Type
Width
Configuration
A Wire
0.025” (±0.003”)
2 strands of 42awg X 16 (total 32 strands), 31 PPI
.635mm (±0.08mm)
B Wire
C Wire
D Wire
E Wire
0.050” (±0.004”)
1.27mm (±0.10mm)
4 strands of 42awg X 16 (total 64 strands), 12.5 PPI
6 strands of 42awg X 16 (total 96 strands), 16 PPI
5 strands of 42awg X 24 (120 total strands), 19 PPI
5 strands of 40awg X 24 (120 total strands), 16 PPI
0.075” (±0.005”)
1.90mm (±0.13mm)
0.095” (±0.007”)
2.41mm (±0.18mm)
0.117” (±0.008”)
2.97mm (±0.20mm)
Bobbin Identification:
Width Color Code Letter Signifier
.025”
Gray
A
.050”
.075”
.100”
.125”
Yellow
Green
Blue
B
C
D
E
EasyBraid expressly warrants that for a period of two (2) years from the date of manufacture,
One Step Lead-Free Braid will be free of defects in material (parts) and workmanship
(labor) when stored appropriately and contained within its original container. Each bobbin is
individually stamped with a lot code. A certificate of compliance is available on our website.
Brown
Made in the
United States of America
Specifications and procedures subject to change without notice.
ONE STEP LEAD FREE DESOLDERING BRAID
11520 K-TEL DRIVE, MINNETONKA, MN 55343
PHONE: (909) 627-2453
WEBSITE: EASYBRAIDCO.COM
DATE:
March
2019
DRAWING
NUMBER
Lead Free Braid
© 2019 DESCO INDUSTRIES INC
Employee Owned