Datasheet > LEDWR80X80M

LEDWR80X80M

更新时间： 2024-01-02 23:15:06

品牌	Logo	应用领域
邦纳 - BANNER		/
页数	文件大小	规格书
2页	227K
描述
LED..R..M Series Ring Lights

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LEDWR80X80M 数据手册

LED..R..M Series Ring Lights

Datasheet

LED Ring Lights (in two sizes) for use with PresencePLUS P4 sensors

•

Low-cost ring lights for PresencePLUS P4 sensors

Solid-state LED matrix; select continuous or strobed operation via sensor software

Direct connection to a PresencePLUS P4 sensor if the sensor is powered by 24 V dc

Mounts directly to a PresencePLUS P4 sensor using the included hardware

Models

PresencePLUS P4 Sensor Models

Model

Color

Ambient Light Filter Kit

Polarizing Filter Kit

62 × 62 mm

80 × 80 mm

LEDIR80X80M

62 × 62 mm

80 × 80 mm

—

LEDIR62X62M

LEDRR62X62M

Infrared, 940 nm

FLTI

—

FLTR (included with

LEDRRPFK)

LEDRR80X80M

Visible Red, 630 nm

LEDWR62X62M

LEDBR62X62M

LEDGR62X62M

LEDWR80X80M

LEDBR80X80M

LEDGR80X80M

White, All Visible

FLTB or FLTG

FLTB

LEDRRPFKS

LEDRRPFK

Blue, 464 to 475 nm

Green, 520 to 540 nm

FLTG

Installing the Ring Light

The ring light bracket attaches to the top of the PresencePLUS lens block, using the hardware kit provided.

Note: Before installing this light it is recommended that an ambient light ﬁlter be installed behind the lens. The ﬁlter improves

image quality by reducing unwanted ambient light.

Sensing Shiny Surfaces

To eliminate direct reﬂections without using polarizing ﬁlters, angle the sensor approximately 15° (or more) from perpendicular to a shiny surface.

Polarizing Kit

If it is necessary to mount the camera at a 90° angle to a shiny surface, the polarizing ﬁlter kit provides ﬁlters for both the LED ring light and sensor

to reduce the negative effects of strong, direct light reﬂections. The red ﬁlter kit (FLTR) is included with the polarizing kit. When light colors other than

red are used, discard the red ﬁlter in the polarizing kit and use the proper ﬁlter (see Models tables). The polarizing ﬁlters reduce the amount of light

returned to the sensor.

Clean the Light

Regularly remove dust, dirt, or ﬁngerprints from the light source.

1. Blow off dust using anti-static compressed air.

2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris.

Important: Do not use any other chemicals for cleaning the light source.

Original Document

116941 Rev. F

19 February 2019

116941

中文翻译

下载PDF

与LEDWR80X80M相关器件

型号	品牌	获取价格	描述	数据表
LEDWR80X80W	BANNER	获取价格	LED..R..W Series Ring Lights
LEDWR90S-G	BANNER	获取价格	LEDxR90S Series Sealed Ring Lights
LEDWR90S-P	BANNER	获取价格	LEDxR90S Series Sealed Ring Lights
LEDWR90SS-G	BANNER	获取价格	LEDxR90S Series Sealed Ring Lights
LEDWR90SS-P	BANNER	获取价格	LEDxR90S Series Sealed Ring Lights
LEDWRM62X62W	BANNER	获取价格	LED..R..W Series Ring Lights
LEDWRV62X62M	BANNER	获取价格	VE Series Ring Lights
LEDWRV70XD5-PM	BANNER	获取价格	VE Series LED High-Intensity Ring Light
LEDWRV70XD5-XM	BANNER	获取价格	VE Series LED High-Intensity Ring Light
LEDWRV75BM	BANNER	获取价格	VE Series LED High-Intensity Sealed Ring Light