Datasheet > LEDWRV62X62M

LEDWRV62X62M

更新时间： 2024-01-25 12:00:23

品牌	Logo	应用领域
邦纳 - BANNER		/
页数	文件大小	规格书
3页	212K
描述
VE Series Ring Lights

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

LEDWRV62X62M 数据手册

VE Series Ring Lights

Datasheet

LED Ring Lights (in two sizes) for use with VE Series vision sensors

•

Low-cost ring lights for VE Series vision sensors

Solid-state LED matrix; select continuous or strobed operation via

sensor software

•

Direct connection to a VE Series vision sensor if the sensor is powered

by 24 V dc

Mounts directly to a VE Series vision sensor using the included hardware

Models

62 × 62 mm Models

LEDIRV62X62M

LEDRRV62X62M

LEDWRV62X62M

LEDBRV62X62M

LEDGRV62X62M

80 × 80 mm Models

LEDIRV80X80M

LEDRRV80X80M

LEDWRV80X80M

LEDBRV80X80M

LEDGRV80X80M

Color

Connection

Infrared, 940 nm

Visible red, 630 nm

White, all visible

300 mm (12 in) cable with a threaded 3-pin

Pico-style connector

Visible blue, 464 nm to 475 nm

Visible green, 520 nm to 540 nm

NOTE: Ring lights are not compatible with VELC..- Sealed Lens Covers. Use another lighting technique

if an IP67 rating is needed for your application.

Install the Ring Light

1. Attach the ring light bracket to the sides of the VE Series vision sensor using the provided hardware kit.

2. Connect the cable to the sensor.

Specifications

Supply Voltage and Current

Useful Life

10,000 hours (LED ON time). When operated within specifications,

Voltage is supplied by the VE Series vision sensors, if operating at 24 V

dc (see sensor manual, p/n 191666)

62 × 62 Models: Infrared—24 V dc at 100 mA max.

80 × 80 Models: 24 V dc at 250 mA max.

All other colors: 24 V dc at 130 mA max.

output decreases less than 30% after 10,000 hours and less than 50%

(less than 40% for red and IR models) after 20,000 hours

Operating Conditions

0 °C to +50 °C (+32 °F to +122 °F)

90% at +50 °C maximum relative humidity (non-condensing)

Connection

300 mm (12 in) cable with a threaded 3-pin Pico-style connector

Environmental Rating

IEC IP20 with a qualified lens properly installed

Construction

Cold-rolled steel with black gloss e-coat plating, acrylic window, four

M3 × 6 mm screws are included to attach the ring light to the VE

Series vision sensor

Certifications

Light Source

LED, see the Models table for wavelengths

Strobe Type

Active low

Original Document

192656 Rev. B

1 June 2016

192656

12 3

中文翻译

下载PDF

与LEDWRV62X62M相关器件

型号	品牌	获取价格	描述	数据表
LEDWRV70XD5-PM	BANNER	获取价格	VE Series LED High-Intensity Ring Light
LEDWRV70XD5-XM	BANNER	获取价格	VE Series LED High-Intensity Ring Light
LEDWRV75BM	BANNER	获取价格	VE Series LED High-Intensity Sealed Ring Light
LEDWRV75PM	BANNER	获取价格	VE Series LED High-Intensity Sealed Ring Light
LEDWRV80X80M	BANNER	获取价格	VE Series Ring Lights
LEDWS50L11-XQ	BANNER	获取价格	LED..S50L.. High-Intensity Spot Light
LEDWS50L20-XQ	BANNER	获取价格	LED..S50L.. High-Intensity Spot Light
LEDWS50L5-XQ	BANNER	获取价格	LED..S50L.. High-Intensity Spot Light
LEDX-10	ETC	获取价格	LEDX Series - 2 Pin Square 5mm x 5mm
LEDX-11	ETC	获取价格	LEDX Series - 2 Pin Square 5mm x 5mm