VE Series LED High-Intensity Sealed Ring Light
Datasheet
High-Intensity Sealed LED Ring Light for use with VE Series smart cameras
•
Rugged, waterproof IEC IP67 housing, for use with VE Series smart
cameras in wet or dirty environments
•
•
•
•
•
Six extremely bright LEDs for even illumination of targets
Continuous or strobed operation
Maintenance-free, rugged construction
Power, configure, and mount directly with VE Series smart cameras
Available with borosilicate glass or polycarbonate window
Models
The following sealed ring lights are compatible with all WVGA, 1.3 MP, and 2 MP models with lenses installed. The sealed ring
lights are compatible with some 5 MP models with lenses installed1.
Model
LED Color
Window Construction
Connection
LEDIRV75BM
LEDRRV75BM
LEDBRV75BM
LEDGRV75BM
LEDWRV75BM
LEDIRV75PM
LEDRRV75PM
LEDBRV75PM
LEDGRV75PM
LEDWRV75PM
Infrared, 850 nm 5 nm
Visible red, 625 nm 5 nm
Visible blue, 475 nm 5 nm
Visible green, 525 nm +10 nm/-5 nm
Visible white, 6200K +500K/-550K
Infrared, 850 nm 5 nm
Borosillicate Glass
350 mm (13.8 in) Pico 3-Pin Quick-
Disconnect
Visible red, 625 nm 5 nm
Visible blue, 475 nm 5 nm
Visible green, 525 nm +10 nm/-5 nm
Visible white, 6200K +500K/-550K
Polycarbonate Plastic
Install the Ring Light
3
4
1
2
5
1. Remove the black thread protector (not shown) from the camera.
2. Remove the temporary imager cover (not shown).
3. Install and focus the C-mount lens (1).
4. Thread the filter (2), if using, onto the front of the lens.
Filters are recommended to improve image quality.
5. Fit a single o-ring (3) into the undercut area behind the camera threads.
1
For 5 MP camera and lens, the sealed ring light is compatible with 12 mm to 50 mm focal length lenses with a filter installed. Without a filter installed, the
sealed ring light is compatible with 75 mm focal lengths. The use of the LHWK-1 setscrew accessory kit is required for focus and aperture locking when
using a ring light.
Original Document
208788 Rev. B
1 November 2018
208788