VE Series LED High-Intensity Ring Light
Datasheet
High-Intensity LED Ring Light for use with VE Series vision sensors
•
•
Compact ring light for VE Series vision sensors
Four extremely bright LEDs for illumination of targets from 0.15 meters to beyond 2 meters
(0.49 feet to 6.56 feet)
•
•
•
•
•
Continuous or strobed operation
Optically isolated strobe signal
Fixed or adjustable intensity, depending on model
Maintenance-free, rugged construction
Evenly and intensely illuminates a 610 millimeters (24 inches) diameter at 1 meter (3.28 feet)
Models
Model
LED Color
Intensity Adjustment
Connection
LEDRRV70XD5-XM
LEDWRV70XD5-XM
LEDBRV70XD5-XM
LEDGRV70XD5-XM
LEDIRV70XD5-XM
LEDUV395RV70XD5-XM
LEDRRV70XD5-PM
LEDWRV70XD5-PM
LEDBRV70XD5-PM
LEDGRV70XD5-PM
LEDIRV70XD5-PM
LEDUV395RV70XD5-PM
Visible red, 620 nm to 630 nm
White, 5000 K to 8300 K
Visible blue, 465 nm to 485 nm
Visible green, 520 nm to 535 nm
Infrared, 850 nm
Fixed
Ultraviolet, 395 nm
300 mm (12 in) cable with a threaded 3-pin
Pico-style connector
1
Visible red, 620 nm to 630 nm
White, 5000 K to 8300 K
Visible blue, 465 nm to 485 nm
Visible green, 520 nm to 535 nm
Infrared, 850 nm
Potentiometer
Ultraviolet, 395 nm
The following caution applies to ultraviolet, 395 nm models:
CAUTION:
Risk Group 2: UV Emitted from this product.
Eye or skin irritation may result from exposure. Use appropriate shielding and eye protection. Risk Group 2 (RG 2)
products generally do not pose a realistic optical hazard if aversion responses limit the exposure duration or where
lengthy exposures are unrealistic.
- IEC 62471
NOTE: Ring lights are not compatible with VELC..- Sealed Lens Covers. Use another lighting technique if an IP67
rating is needed for your application.
Install the Ring Light
1. Attach the ring light bracket to the sides of the VE Series vision sensor using the provided hardware kit.
2. Connect the cable to the sensor.
Light Intensity Adjustment
Turn the 270° intensity potentiometer with a small flat-blade screwdriver to adjust the light’s intensity.
1. Apply power to the light and turn the potentiometer all the way clockwise for maximum intensity.
2. If the object to be sensed is too bright at maximum intensity, turn the potentiometer counterclockwise, a little at a time, testing with the
target object, until the correct brightness is achieved.
1
Connects directly to the VE Series vision sensors
Original Document
192657 Rev. B
21 September 2016
192657