LED-20W Series
Switch Mode LED Drivers with Isolation,
Constant Current, Dimming & Constant Voltage
Electrical Specifications
Input Voltage Range:
Input Over-Voltage:
Frequency:
100-277 Vac Nom. (90-305 V Min/Max)
Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs
50/60 Hz Nom. (47-63 Hz Min/Max)
Power Factor:
Inrush Current:
Input Current:
Efficiency:
>0.90 @ full load, 100V through 277V
<15.0 Amps max @ 230 Vac, cold start 25ºC
0.25 Amps max at 120 Vac
85% typical at max load
Maximum Power:
Line Regulation:
Load Regulation:
THD:
20W
± 2%
• Total Power: 20 Watts
• IP66 & NEMA4
± 3%
• Input Voltage: 100-277 Vac Nom. • High Power Factor
• UL Dry & Damp Location Rated • UL Sign Components Manual
(S.A.M. Models) Models
<_ 20% @ >_ 70% load 100-230V, >_ 80% load 277V
Leakage Current:
Hold Up Time:
Output Protection:
300 µA Typical
Half Cycle
Constant Current - Product Specifications
Over-Voltage, Over-Current, and
Short Circuit Protection with Auto Recovery
Output Current Output Voltage Max. Output Typical
Model Number
(mA ±4%)
350
Range (Vdc)
19-57
16-48
15-43
14-40
12-36
10-28
8-24
Power (W) Efficiency
LED20W-57-C0350-XX
LED20W-48-C0350-XX
LED20W-43-C0460-XX
LED20W-40-C0500-XX
LED20W-36-C0550-XX
LED20W-28-C0700-XX
LED20W-24-C0700-XX
LED20W-24-C0830-XX
LED20W-22-C0910-XX
LED20W-18-C1100-XX
LED20W-15-C1330-XX
LED20W-13-C1540-XX
LED20W-12-C1660-XX
20
16.8
20
84%
83%
83%
82%
82%
81%
81%
81%
81%
80%
80%
79%
78%
Environmental Specifications
Minimum Starting Temp: -30ºC
350
460
Storage Temperature:
Maximum Case Temp.
Humidity:
-40ºC to +85ºC
90°C
500
20
550
20
700
20
5% to 95%
700
16.8
20
Cooling:
Convection
Class A
830
8-24
Sound Rating:
Vibration Frequency:
MTBF:
910
7-22
20
5 to 55 Hz/2g, 30 minutes
1100
1330
1540
1660
6-18
20
5-15
20
488,000 Hours at full load and 40ºC ambient conditions
per MIL-217F Notice 2
4-13
20
Weight:
5.8 oz (165 grams) typical
4-12
20
-XXꢀindicatesꢀdimmingꢀoptionsꢀareꢀavailable.ꢀSeeꢀoptionsꢀatꢀleft.ꢀBlankꢀ=ꢀfixedꢀcurrentꢀoutput
Constant Voltage - Product Specifications
Output Voltage Output Current Max. Output
Typical
Efficiency
Model Number
(Vdc ±5%)
Range (mA)
415-1660
385-1540
333-1330
275-1100
228-910
208-830
175-700
138-550
125-500
115-460
88-350
Power (W)
LED20W-12
12
13
15
18
22
24
28
36
40
43
48
57
20
20
20
20
20
20
20
20
20
20
16.8
20
82%
82%
•
LED20W-13
LED20W-15
LED20W-18
LED20W-22
Ordering Options:
83%
-D:
0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on
the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers.
Seeꢀpageꢀ3ꢀforꢀadditionalꢀspecifications.
83%
84%
ꢀ
LED20W-24
84%
•
-PD: PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output
side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle,
LED20W-28
LED20W-36
LED20W-40
LED20W-43
LED20W-48
LED20W-57
84%
ꢀ
200Hzꢀtoꢀ1KHz,ꢀ0-10VꢀPulse.ꢀSeeꢀpageꢀ4ꢀforꢀadditionalꢀspecifications.
85%
85%
85%
85%
88-350
85%
•
Indicates S.A.M.
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Class 2:
US/Canada
US Only
Specifications subject to change without notice.
Rev 9-11-15
Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com