DC-DC Constant Current LED driver
LDD-H series
Features :
Constant current output: 300mA to 1000mA
Wide input voltage: 9 ~ 56VDC
Wide output LED string voltage: 2 ~ 52VDC
High efficiency up to 97%
DC/DC step-down converter
Built-in EMI filter, comply with EN55015 and FCC part15 without
additional input filter and capacitors
Built-in PWM and remote ON/OFF control
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully encapsulated with IP67 level
Compact size
Low cost, high reliability
Suitable for driving illumination LED
3 years warranty
LDD-350H
Blank : pin style
W
W
: wire style
SPECIFICATION
ORDER NO.
LDD-300H
LDD-350H
LDD-500H
LDD-600H
LDD-700H
LDD-1000H
CURRENT RANGE
300mA
350mA
500mA
600mA
700mA
1000mA
VOLTAGE RANGE
2 ~ 52VDC
3% at 24VDC input ; 4% at 48VDC input
CURRENT ACCURACY (Typ.)
RIPPLE & NOISE(max.) Note.2
SWITCHING FREQENCY
EXTERNAL CAPACITANCE LOAD (max.)
OUTPUT
150mVp-p
40KHz ~ 1000KHz
2.2uF
150mVp-p
150mVp-p
200mVp-p
200mVp-p
350mVp-p
9 ~ 56VDC
VOLTAGE RANGE
EFFICIENCY (max.)
97% at full load and 36VDC/48VDC input
320mA
INPUT
450mA
550mA
650mA
900mA
Full load Note.3 270mA
DC CURRENT
FILTER
No load
10mA
Capacitor
Leave open if not use
PWM
Power ON with dimming: DIM ~ -Vin >2.5 ~ 6VDC or open circuit
Power OFF : DIM ~ -Vin < 0.8VDC or short
100 ~ 1KHz
REMOTE ON/OFF
DIMMING
&
PWM FREQUENCY
ON/OFF
CONTROL
QUIESCENT INPUT CURRENT
IN SHUTDOWN MODE(max.)
1mA at PWM dimming OFF and 24VDC input
Regulated at rated output current
SHORT CIRCUIT
Protection type: Can be continued, recovers automatically after fault condition is removed
Tj 150 typically(IC1) detect on main control IC
Protection type : Shut down, recovers automatically after temperature goes down
-40 ~ + 85 (Refer to derating curve)
PROTECTION
OVER TEMPERATURE
WORKING TEMP.
20% ~ 90% RH non-condensing
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-55 ~ +125 , 10 ~ 95% RH
ENVIRONMENT
0.03% /
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
100
OPERATING CASE TEMP. (max.)
EMI CONDUCTION & RADIATION
EMS IMMUNITY
Compliance to EN55015, FCC part 15 class B
Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A
EMC
2000Khrs min. MIL-HDBK-217F (25
)
MTBF
DIMENSION
31.8*20.3*12.2mm or 1.25"*0.8"*0.48" inch (L*W*H)
LDD-H:16g ; LDD-HW:18.6g
OTHERS
NOTE
WEIGHT
Expoxy(UL94-V0)
POTTING MATERIAL
1.All parameters are specified at normal input(48VDC), rated load, 25 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf capacitor.
3.Test condition: 48VDC input.
File Name:LDD-H-SPEC 2011-10-07