DC-DC Constant Current Step-Down LED driver with DALI
LDD-H-DA series
■ Features :
ꢀDC/DC step-down converter
ꢀConstant current output: 350mA to 1400mA
ꢀWide input voltage: 6 ~ 50VDC
Wide output LED string voltage: 3 ~ 45VDC
ꢀHigh efficiency up to 95%
ꢀBuilt-in EMI filter, comply with EN55015 without
additional input filter and capacitors
ꢀDALI dimming function input under voltage lockout
ꢀBuilt-in PWM and remote ON/OFF control(pin style only, wire style optional)
ꢀProtections: Short circuit
ꢀCooling by free air convection
ꢀFully encapsulated with IP65 level
ꢀCompact size
ꢀSuitable for driving illumination LED
ꢀ3 years warranty
LDD-350H-
Blank : pin style
W DA
W
: wire style
SPECIFICATION
ORDER NO.
LDD-350H-
DA
LDD-700H-
DA
LDD-1050H -
DA
LDD-1400H -
DA
CURRENT RANGE
350mA
700mA
1050mA
1400mA
VOLTAGE RANGE
Note.4 3 ~ 45VDC
3 ~ 36VDC
5% at 48VDC input
300mVp-p
5% at 28VDC input
500mVp-p
CURRENT ACCURACY (Typ.)
RIPPLE & NOISE(max.) Note.2
SWITCHING FREQENCY (Typ.)
EXTERNAL CAPACITANCE LOAD (max.)
OUTPUT
500mVp-p
500mVp-p
500KHz
1400uF
6 ~ 40VDC
1280mA
6 ~ 50VDC
VOLTAGE RANGE
EFFICIENCY (max.)
95% at full load and 48VDC input
INPUT
Full load Note.3 275mA
550mA
825mA
DC CURRENT
FILTER
No load
5mA
Capacitor
Leave open if not use
PWM
Power ON with dimming: DIM ~ -Vin >1.2 ~ 5VDC or open circuit, max. operation voltage 5.5VDC
REMOTE ON/OFF
PWM FREQUENCY
DIMMING
&
Power OFF : DIM ~ -Vin < 0.1VDC or short
200 ~ 1KHz
ON/OFF
CONTROL
(PIN STYLE ONLY)
QUIESCENT INPUT CURRENT
IN SHUTDOWN MODE(max.)
1mA at PWM dimming OFF and 24VDC input
Leave open if not use
ANALOG
DIMMING
&
REMOTE ON/OFF
SHORT CIRCUIT
Power ON with dimming: Analog DIM ~ -Vin >0.1 ~ 2.5VDC or open circuit, max. operation voltage 5.5VDC
Power OFF : Analog DIM ~ -Vin <0.1VDC or short
ON/OFF
CONTROL
(PIN STYLE ONLY)
Regulated at rated output current
Protection type: Can be continued, recovers automatically after fault condition is removed
PROTECTION
Start up
4.2VDC
INPUT VOLTAGE
LOCKOUT
Shut-down
3.8VDC
-40 ~ + 85℃(Refer to derating curve)
20% ~ 90% RH non-condensing
-55 ~ +125℃, 10 ~ 95% RH non-condensing
0.03% / ℃
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
ENVIRONMENT
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
100℃
OPERATING CASE TEMP. (max.)
EMC EMISSION
Compliance to EN55015
EMC
EMC IMMUNITY
Compliance to EN61547, EN61000-4-2,3,4,6,8, light industry level, criteria A
1.6Mhrs min. MIL-HDBK-217F (25℃)
40.6*23.5*10.1mm or 1.6"*0.93"*0.40" inch (L*W*H)
LDD-H-DA:18g ; LDD-H-WDA:23g
Expoxy(UL94-V0)
MTBF
DIMENSION
OTHERS
NOTE
WEIGHT
POTTING MATERIAL
1.All parameters are specified at normal input(48VDC), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf capacitor.
3.Test condition: 48VDC input for 350~1050mA, 28VDC input for 1400mA.
4.Output voltage will always step down by 3 volts from input DC voltage.
5.The output of LDD-H should not be connected to the input of the same unit or output from other sources.
File Name:LDD-H-DA-SPEC 2017-08-17