40W Multiple-Stage Output Current LED Power Supply
LCM-40 series
Features :
Output current level selectable by DIP S.W.
180~295VAC input only
Built-in active PFC function
Protections: Short circuit / Over voltage / Over temperature
Cooling by free air convection
Fully isolated plastic case
Class
power unit, no FG
Built-in 0~10Vdc and PWM signal dimming function
Built-in 12V/50mA auxiliary output
IP20 design
Temperature compensation function by external NTC
No load power consumption <1W@AC always on (Note 8)
Power supplies synchronization function up to 10 units
Suitable for LED lighting applications
3 years warranty
110
F
M
M
SELV
SPECIFICATION
MODEL
LCM-40
SELECTABLE CURRENT Note.3 350mA
500mA
2 ~ 80V
600mA
2 ~ 67V
700mA
2 ~ 57V
900mA
2 ~ 45V
1050mA
2 ~ 40V
DC VOLTAGE RANGE
RATED POWER
2 ~ 100V
42W
RIPPLE CURRENT
200mVp-p
OUTPUT
RIPPLE & NOISE (max.) Note.2 700mVp-p
NO LOAD OUTPUT VOLTAGE (max.) 110V
65V
CURRENT ACCURACY
SETUP, RISE TIME
5.0%
Note.6 1000ms, 80ms / 230VAC at rated power
HOLD UP TIME (Typ.)
VOLTAGE RANGE
16ms/230VAC at rated power
Note.4 180 ~ 295VAC
254 ~ 417VDC
FREQUENCY RANGE
POWER FACTOR (Typ.)
47 ~ 63Hz
PF 0.98/230VAC, PF 0.97/277VAC at rated power (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION Total harmonic distortion will be lower than 20% when output loading is 75% or higher
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
Note.7 91%
0.21A/230VAC
0.17A/277VAC
INRUSH CURRENT(Typ.)
LEAKAGE CURRENT
SHORT CIRCUIT
COLD START 35A/230VAC
<0.5mA / 240VAC
Constant current limiting, recovers automatically after fault condition is removed
110 ~ 130V
OVER VOLTAGE
Protection type : Shutdown o/p voltage, re-power on to recover
PROTECTION
FUNCTION
ENVIRONMENT
90
10 (RTH2)
OVER TEMPERATURE
Protection type : Shut down o/p voltage, re-power on to recover
12V @ 50mA for driving fan; Tolerance 5%
AUXILIARY POWER
TEMP. COMPENSATION
DIMMING
By external NTC(not provide with the power supply), please see "Temperature Compensation Operation"
Please see "Dimming Operation"
Please see "Synchronization Operation"
SYNCHRONIZATION
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
-30 ~ +60 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +80 , 10 ~ 95% RH
0.03%/ (0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
UL8750, ENEC EN61347-1, EN61347-2-13,EN62384 independent approved
I/P-O/P:3.75KVAC
SAFETY &
EMC
I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55015, EN61000-3-2 Class C( 35% rated power) ; EN61000-3-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2KV), criteria A
EMC IMMUNITY
MTBF
K hrs min. MIL-HDBK-217F (25
)
OTHERS
NOTE
DIMENSION
123.5*81.5*23mm (L*W*H)
0.24Kg
PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf parallel capacitor.
3. Please see "DIP switch table".
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. Efficiency is measured at 500mA/80V output set by DIP switch.
8. No load power consumption<1W is measured at 180~277VAC.
File Name:LCM-40-SPEC 2012-09-11
5秒后页面跳转
MBRS340T3G手册解读：参数说明、产品特性及应用
PMOS管背靠背连接：串联还是并联？
高压电解电容的分类与选型策略
数码管：基本概念、分类、技术发展及市场趋势
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
