Ordering number : EN7232A
LB1940T
LB1940U
Monolithic Digital IC
2-ch H-Bridge Constant Current Driver
Overview
The LB1940T and LB1940U are 2-phase exciter type bipolar stepping motor driver ICs that feature low-voltage,
(supporting 3V battery) and low current operation with low saturation voltage. These ICs enable constant-current control
of actuators, and are optimal for driving the actuators of PC peripherals such as USB compatible scanners, FDDs, and
printers, as well as for controlling the shutter, iris, and AF of a digital still camera.
Features
• Low-voltage driving
2-power source type:
Single power source type: VS = V D = 1.9 to 7.5V
• Low saturation output:
• Constant-current control
VS = 1.6 to 7.5V, V = 1.9 to 6.5V
DD
D
V (sat) = 0.3V at I of 200mA
O O
• Built-in reference voltage (Vref = 0.9V)
• Small-sized, low-profile package (LB1940T: TSSOP20; 225mil; thickness (t) = 1.2mm max.)
(LB1940U: MSOP20; thickness (t) = 0.85mm max.)
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Output applied voltage
Output Current
Symbol
Conditions
Ratings
-0.3 to +10.5
Unit
V
VB max
VS1, VS2, V
DD
V
I
max
OUT1, OUT2, OUT3, OUT4
-0.3 to +10.5
400
V
OUT
max
mA
V
O
Input applied voltage
Allowable power dissipation
Operating temperature
Storage temperature
V
max
ENA1, ENA2, IN1, IN2, VC
-0.3 to +10.5
800
IN
Pd max
Topr
Mounted on a specified board *
mW
°C
°C
-20 to +85
-55 to +150
Tstg
* Mounted on a Specified board: 114.3mm×76.1mm×1.6mm, glass epoxy
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
D2706 MS IM / 93004 JO IM No.7232-1/8