LANK “H” Series
3000VDC I/O Isolation
Single and Dual Output
24 Pin DIP & SMT Package
2:1 Wide Input Voltage Range
FEATURES
UL E193009
TUV
● 3000VDC I/O Isolation
● Over Current Protection
CB
● MTBF > 3,000,000 Hours
● High Efficiency up to 80%
● 2:1 Wide Input Voltage Range
● 3 Watts Regulated Output Power
● International Safety Standard Approval
● Standard 24 Pin DIP Package and SMT Type Package
SPECIFICATIONS: LANK “H” Series
All specifications apply @ 25°C ambient unless otherwise noted
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS (CONTINUED)
Input Voltage Range ............ 5V nominal input......................... 4.5 - 6VDC
Isolation Voltage (Input to Output).........................................3000VDC min.
Isolation Resistance ...............................................................109 ohms min.
Isolation Capacitance ................................................................ 300pF max.
12V nominal input....................... 9 - 18 VDC
24V nominal input..................... 18 - 36 VDC
48V nominal input..................... 36 - 75 VDC
Input Filter....................................................................................... Pi Type
ENVIRONMENTAL SPECIFICATIONS
Input Surge Voltage (100ms max) ....... 5V input .............................15VDC
12V input ..........................36 VDC
Operating Temperature
Standard ........................................................................... -25°C ~ +71°C
“I” Suffix (See Note 7).......................................................-40°C ~ +71°C
24V input ..........................50 VDC
48V input ........................100 VDC
Storage Temperature ..........................................................-55°C ~ +105°C
Relative Humidity...................................................................5% to 95% RH
Thermal Shock .................................................................... MIL-STD-810D
Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z
MTBF (See Note 3) ............................................................3.69 x 106 hours
Input Reflected Ripple Current (Note 2)......................................120mAp-p
(nominal Vin and full load)
Start Up Time (nominal Vin and constant resistive load).............30ms typ.
OUTPUT SPECIFICATIONS
Output Voltage..............................................................................see table
Voltage Accuracy (nominal Vin and full load) ...................................... ±1%
Output Current ..............................................................................see table
Output Power.......................................................................... 3 watts max.
Line Regulation (LL to HL at FL)....................................................... ±0.2%
PHYSICAL SPECIFICATIONS
Weight
DIP Type.............................................................................. 14g (0.48 oz)
SMT Type ............................................................................ 15g (0.52 oz)
Dimensions................... 1.25 x 0.80 x 0.40 inches (31.8 x 20.3 x 10.2 mm)
Case Material ..................................................Non-conductive black plastic
Base Material...................................................Non-conductive black plastic
Potting material..................................................................Epoxy (UL94-V0)
Load Regulation (25% to 100% FL)......... Single Output.................. ±0.2%
Dual Output ....................... ±2%
Cross Regulation (Dual) (Asymmetrical load 25% / 100% FL) ............ ±5%
Minimum Load (See Note 1) ......................................................10% of FL
Ripple/Noise (20 MHz BW)...... 3.3V and 5V outputs ...................75mVp-p
others.........................1%/p-p of Vout max
SAFETY & EMC
Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1
Conducted Emissions.................EN55022......................................Class A
Radiated Emissions....................EN55022......................................Class A
ESD ............................................EN61000-4-2.....................Perf. Criteria B
Radiated Immunity......................EN61000-4-3.....................Perf. Criteria A
Fast Transient.............................EN61000-4-4.....................Perf. Criteria B
Surge..........................................EN61000-4-5.....................Perf. Criteria B
Conducted Immunity...................EN61000-4-6.....................Perf. Criteria A
Temperature Coefficient ................................................. ±0.02% / °C max.
Transient Response Recovery Time (25% load step) .......................500us
PROTECTION SPECIFICATIONS
Over Load Protection (% of full load at nominal input)................ 180% typ.
Short Circuit Protection............................. continuous, automatic recovery
GENERAL SPECIFICATIONS
Efficiency.......................................................................................see table
Switching Frequency................................................................100KHz typ.
Due to advances in technology, specifications subject to change without notice
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
5秒后页面跳转
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
AMD宣布全球裁员约1000人，调整战略聚焦增长
英伟达新AI芯片Rubin或提前半年亮相
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
