LAN E & F SERIES
TO 1.8 WATTS
1.8 watt SIP for LAN Applications
PRODUCT FEATURES
• Ultra Miniature SIP: 7 and 12 Pin Compatible
• Three levels of I/O Isolation Available
• Single and Dual Outputs
• Low Reflected Ripple Current
• Regulated and Non-Regulated Versions
THE LAN E AND F SERIES
When board space is at a premium and volt-
age conversions require low power, the LAN E
and LAN F Series, miniature converters, offer
superior solutions for an economical cost.
Between the two series you have a multitude
of options and operational ratings to choose
from in custom-tailoring the converter to the
demands of the application. Populating 0.179
or 0.516 square inches of board space , the
LAN E and F Series, respectively, provide up
to 1.5 watts of power while maintaining speci-
fication over the entire commercial operation
temperature range.
SPECIFICATIONS: LAN E AND F SERIES
All specifications apply @ +25 C ambient unless otherwise noted.
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Input Voltage Range 5,12,15,24VDC LANE 5ꢀ
......................................................LANF 10ꢀ
Input Filtering: LANE..................Low ESR Capacitors
LANF ................................Pi Network
Efficiency %Typicalꢁ Regulated ....................55 to 65ꢀ
Non-Regulated ..................................70 to 85ꢀ
Isolation Voltage %input to outputꢁ LAN E......1000VDC
LAN F ................................500VDC or ꢂ000VDC
Switching Frequency ........................20kHz minimum
OUTPUT SPECIFICATIONS
Output Current ..........................................See table
Voltage Tolerance.............. 5ꢀ%nom. line 100ꢀ loadꢁ
Regulation:
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature ............................0 to +71°C
Storage Temperature..........................-40 to +100°C
Cooling ......................................Free Air Convection
Line: LAN E&F Non-Regulated ........ 1.ꢂꢀ/ꢀ of Vin
Line: LAN F Regulated.................................. 0.5ꢀ
Load: LAN E&F Non-Regulated ..........%E=10ꢀꢁ 8ꢀ
........................................................%20-100ꢀ loadꢁ
Load: LAN F Regulated ................................ 0.5ꢀ
Short Circuit Protection ............................Short Term
Ripple/Noise %20MHz BWꢁ Regulated:50mV p-p max.
Non-Regulated ......100mV p-p max.
PHYSICAL SPECIFICATIONS
Dimensions LAN E ..................0.765 x 0.2ꢂ5 x 0.ꢂ7”
Dimensions - LAN F....................1.29 x 0.40 x 0.55”
Case Material ..............Non-Conductive Black Plastic
Due to advances in technology, specifications subject to change without
notice.
2/26/02
1
603 778 2300
WWW.WALLINDUSTRIES.COM