LANEW Series
Single and Dual Outputs
2:1 Wide Input Voltage Range
FEATURES
● Low Ripple & Noise
● 2 Watts Output Power
● Single and Dual Output
● External ON/OFF Control
● 2:1 Wide Input Voltage Range
● UL94-V0 Case Potting Materials
● Continuous Short Circuit Protection
● Input to Output Isolation up to 1KVDC
● SIP Package: 0.86 x 0.36 x 0.44 Inches
● No External Input and Output Capacitor Needed
SPECIFICATIONS: LANEW Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
5V nominal input
12V nominal input
24V nominal input
48V nominal input
4.5 – 9 VDC
9 – 18 VDC
18 – 36 VDC
36 – 75 VDC
See Table
Input Voltage Range
Input Current
Input Filter
Capacitor Type
5V/ms, max
(Complies)
Input Voltage Variation
dv/dt
5V nominal input
15 VDC
12V nominal input
36 VDC
Input Surge Voltage (100ms max)
24V nominal input
50 VDC
48V nominal input
100 VDC
5V nominal input (100µF)
12V nominal input (100µF)
400mAp-p
Input Reflected Ripple Current
150mAp-p
(There is an external capacitor at input (See Note 2))
24V nominal input (10µF)
48V nominal input (10µF)
Power Up
380mVp-p
170mVp-p
Start Up Time
1ms typ
(Nominal Vin and constant resistive Load)
Remote ON/OFF
DC-DC ON
1ms typ
Open or high impedance
Control pin applied current
DC-DC OFF
4 ~ 8mA max (via 1KΩ)
Remote OFF Input Current (nominal input)
1mA max
Application Circuit
Remote ON/OFF
OUTPUT SPECIFICATIONS
Output Voltage
See Table
±1%
Voltage Accuracy (Full load and nominal Vin)
Line Regulation (Low line to high line at full load)
±0.5%
Single Output
Dual Output
Asymmetrical load 25% / 100% FL
±0.75%
±1%
Load Regulation (25% to 100% full load)
Cross Regulation (Dual)
Minimum Load (See Note 1)
±5%
10% of full load
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797