LABC14-12V Charger
12V Lead-Acid Battery Smart Charger
INPUT SPECIFICATIONS
All specifications are typical at nominal input, full load.
INPUT SPECIFICATIONS
Input Voltage
Input Frequency
Protection
AC 100 – 264VAC
50 – 60Hz
Reverse Polarity, short circuit
12 volt SLA, VRLA, Gel, AGM or
flooded
Battery Size
OUTPUT SPECIFICATIONS 6V /12V
Charge Voltage Limited 14.5V
Float Charge Voltage
Charging Current
Battery Types
13.6V
FEATURES
0.8 amp
All types 12V lead acid batteries
UNIVERSAL INPUT (AC100-240V)
CONSTANT CURRENT/VOLTAGE,
REVERSE POLARITY INDICATOR
SHORT CIRCUIT PROTECTION
3 STAGE AUTO CHARGING
Charging Algorithm Auto 3 Stages
Constant Current
Stage 1 Constant current 0.8 amp
Battery voltage must be above 4V
Stage 2 Constant voltage 14.5V
Stage 3 Float charge 13.6V
Constant Voltage
Floating
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Cooling.
-10°C~+40°C
-40°C ~ +70°C
Convection
Pwr on, no battery connected –Green
Charging – Red
Charged - Flashing Green
Charge/Float charging – Green Dim
Reverse polarity – Red and Green
flashing
LED Indications
Operating Humidity
Storage Humidity
20 – 80% Rh
10 – 90% Rh
MECHANICAL SPECIFICATIONS
Case Dimension
Input Configuration
Output Connector
Weight
L81 x W51 x H28(mm)
Fixed cord 2 pin USA
5.5 x 2.1 x 11.0mm C+
150 grams
GENERAL SPECIFICATIONS
MTBF(Calculated)
30,000 Calculated hours at 25°C
by MIL-HDBK-217F
Hi pot, ESD
3,000V, 1 minute ESD 8000V
Kaga Electronics (USA) Inc. 780 Montague Expressway, #403, San Jose, CA 95131
Phone: (408) 570-0955 | Fax: (408) 570-0186 | Toll Free: (888) 2-VOLGEN (888-286-5436)
www.volgen.com