ST®II
Compatible
ST®II - Compatible - Multimode Adaptor
Part Number
J801122Z01D
Description
ST®II Compatible adaptor, Multimode,
Phosphor Bronze sleeve
Part Number
J801122Y01D
Description
ST®II Compatible adaptor, Single Mode,
Zirconia sleeve
ST®II - Jumper Cable Assemblies
• FCI’s cable assemblies are available in
several standard lengths as full assemblies
or pigtails.
• FCI’s cable assemblies are factory
mounted and tested according to most
stringent quality requirements.
Fibres
- Multimode types 50/126 µm and
62.5/126 µm, graded index.
Description
Part Numbers
ST®II/ST®II
ST®II/ST®II
ST®II/ST®II
Pigtails ST®II
Pigtails ST®II
ST®II/ST®II
ST®II/ST®II
ST®II/ST®II
Pigtails ST®II
Pigtails ST®II
1 meter
3 meter
10 meter
1 meter
3 meter
1 meter
3 meter
10 meter
1 meter
3 meter
Multimode
L30 30 0100 01
L30 30 0300 01
L30 30 1000 01
L31 30 0100 01
L31 30 0300 01
L32 30 0100 01
L32 30 0300 01
L32 30 1000 01
L33 30 0100 01
L33 30 0300 01
Cable
- Coloured outer jacket, Ø 2.4 or 3.0 mm.
- Traction reinforced by the use of aramide
fibres.
- Attenuations multimode cable:
3.2 dB/km at 850 nm / 1.0 dB/km at 1300 nm.
Multimode
Multimode
Multimode
Multimode
For other cable lenghts and mixed connector
ends, consult FCI.
Specific cable requirements and cable
harnesses on request.
Single Mode
Single Mode
Single Mode
Single Mode
Single Mode
Termination Tool Kits
FCI’s termination tool kit guarantees an
optimum connector termination in
way and is standard suitable for FCI’s ST®II -
compatible product family.
combination with FCI’s polishing procedure.
The termination tool kit is built in a modular
An extension kit is available for termination of
FCI’s SC product family.
Description
Part Numbers
Toolkit for ST connector
Kit of consumables
Extension kit SC
STY263
SCY255 A11
STY263A30
SCY255A30
Microscope (200x)
FCI reserves the right to make any engineering refinements, alterations or improvements deemed necessary on its products. The dimensions
appearing in this catalogue are subject to change without notice. When dimensions are critical detailed drawings should be requested.