L3000S
L3030
SUBSCRIBER LINE INTERFACE KIT
PRELIMINARY DATA
.
PROGRAMMABLE DC FEEDING RESIS-TAN-
CEAND LIMITINGCURRENT (fourvaluesavai-
lable)
THREE OPERATING MODES :
STAND-BY, CONVERSATION, RINGING
NORMAL/BOOSTBATTERY,DIRECT/REVER-
SE POLARITY
SIGNALLINGFUNCTION (off-hook/GND-key)
FILTERED OFF-HOOK DETECTION IN
STAND-BY (10ms)
.
.
.
.
PLCC44
FLEXIWATT15
.
QUICK OFF-HOOK DETECTION IN CONVER-
SATION (< 1ms) FOR LOW DIAL PULSE DE-
TECTION DISTORTION
.
HYBRID FUNCTION
.
RINGING GENERATION WITH QUASI ZERO
OUTPUT IMPEDANCE, ZERO CROSSING IN-
JECTION (no ext. relay needed) AND RING
TRIP DETECTION
PowerSO20
slug-up
slug-down
.
.
AUTOMATIC RINGING STOP WHEN OFF-
HOOK IS DETECTED
PARALLEL AND SERIAL DIGITAL INTERFA-
ORDERING NUMBERS :
L3030 (PLCC44)
L3000SX-VM (FLEXIWATT15)
L3000SX (PowerSO20 slug-up)
L3000SX-77 (PowerSO20 slug-down)
CES
.
.
TELETAXESIGNALINJECTION(2VRMS/5VRMS
)
LOW NUMBER OF EXTERNAL COMPO-
NENTS
GOOD REJECTION OF THE NOISE ON BAT-
TERY VOLTAGE (20dB at 10Hz and 35dB at
1kHz)
POSSIBILITY TO WORK ALSO WITH HIGH
COMMON MODE CURRENTS
INTEGRATED THERMAL PROTECTION WITH
THERMAL OVERLOADINDICATION
SURFACE MOUNT PACKAGE
(PLCC44 + PowerSO-20)
Additionalfunctions, such as batteryreversal, extra
batteryuse, lineovervoltagesensing andmetering-
pulse injection are also featured ; most external
characteristics,asACandDCimpedances,arepro-
grammablewithexternalcomponents.TheSLICin-
jects ringing in balanced mode and for that,as well
as for the operation in battery boosted, a positive
batteryvoltage shall be available on thesubscriber
card.As the rightringing signalamplification bothin
voltage and in currentis provided by SLIC, thering
signalgeneratorshall onlyprovidea lowlevelsignal
(0.285Vrms).
.
.
.
.
DESCRIPTION
The ST SLIC KIT (L3000S/L3030)is a set of solid
statedevicesdesignedto integratemain of the fun-
ctions needed to interface a telephoneline. It con-
sists of 2 integrated devices : the L3000S line
interfacecircuit and the L3030control unit.
Thiskit performsthe main featuresof the BORSHT
functions:
Thiskit is fabricatedusing a 140VBipolartechnolo-
gy for L3000Sand a 12VBipolar I2L technologyfor
L3030.
L3030 is available PLCC44 and L3000S in both
FLEXIWATT15andPowerSO-20forsurfacemount
application.
This kit is suitable for all the following applications:
C.O.(CentralOffice),DLC(DigitalLoopCarrier)and
high range PABX (Private Automatic Branch Ex-
change).
Batteryfeed
-
Ringing
-
Signalling
Hybrid
-
-
June 1997
1/29