L Series
Miniature Slide Switches
Features/Benefits
Typical Applications
•
•
•
•
•
Positive detent
•
•
Communications equipment
Enclosed housing
Lighting devices
Maintained and momentary functions
PC and panel mounting
RoHS compliant
Models Available
Specifications
Materials
CONTACT RATING: Q contact material (LX0X, LX1X Models): 4 AMPS HOUSING: 6/6 nylon (UL94V-2), black.
I
@ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @
125 V DC (UL). See page I-23 for additional ratings.
ACTUATOR: 6/6 nylon (UL94V-2), black.
‘13’ actuator, natural (standard).
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
CONTACTS: Q contact material: Copper, silver plated. See page
I-23 for additional contact materials.
CONTACT RESISTANCE: Below 10 m Ω typ. initial
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
TERMINALS: Q contact material: Copper, silver plated. See page
I-23 for additional contact materials.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: -30ºC to +65ºC
STORAGE TEMPERATURE: -30ºC to +85ºC
CONTACT SPRING: Music wire or stainless steel.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I-20 through I-24. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
L202 DPDT
L203 DP3T
L101 SPST
L102 SPDT
L103 SP3T
L104 SP4T
Actuator
01 .200” high
02 .335” high
03 .375” high
05 .312” high
11 .100” high
L112 SPDT, mom.
L113 SP3T, mom. to one end
L123 SP3T, mom. to both ends
L201 DPST
L204 DP4T
L212 DPDT, mom.
12 Screwdriver slot
13 Plunger without cap
14 Plunger with .200” dia. cap
15 Plunger with .310” dia. cap
17 Plunger with .458” dia. cap
19 Plunger with .590” dia. cap
Detent
1
2
With detent
Without detent
Mounting Style
MS PC Thru-hole
MA Right angle, PC thru-hole
ML Right angle, PC thru-hole
MV Right angle, PC thru-hole
SS Panel with mounting ears
TS Panel with integral mounting ears
Terminations
02 PC Thru-hole
01 Solder lug with notch
03 Solder lug with hole
04 PC Thru-hole
10 PC Thru-hole
06 Wire wrap
Contact Material
B
Q
G
Gold
Silver
Gold over silver
12 PC Thru-hole
Seal
NONE No seal
E
Epoxy seal
Cap Color
Black
2
NONE No cap
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
19 Mar 2019
www.ckswitches.com
I–19