KSZ9131MNX
Gigabit Ethernet Transceiver with GMII/MII
Support
Features
Target Applications
• Single-Chip 10/100/1000 Mbps Ethernet Trans-
ceiver Suitable for IEEE 802.3 Applications
• GMII/MII Standard Interface with 3.3V/2.5V/1.8V
Tolerant I/Os
• Laser/Network Printer
• Network Attached Storage (NAS)
• Network Server
• Broadband Gateway
• Gigabit SOHO/SMB Router
• IPTV
• Auto-Negotiation to Automatically Select the
Highest Link-Up Speed (10/100/1000 Mbps) and
Duplex (Half/Full)
• IP Set-Top Box
• On-Chip Termination Resistors for the Differential
Pairs
• Game Console
• IP Camera
• On-Chip LDO Controller to Support Single 3.3V
Supply Operation
• Triple-Play (Data, Voice, Video) Media Center
• Media Converter
• Jumbo Frame Support Up to 16 KB
• 125 MHz Reference Clock Output
• Energy-Detect Power-Down Mode for Reduced
Power Consumption When Cable is Not Attached
• Energy Efficient Ethernet (EEE) Support with
Low-Power Idle (LPI) Mode and Clock Stoppable
for 100BASE-TX/1000BASE-T and Transmit
Amplitude Reduction with 10BASE-Te Option
• Wake-On-LAN (WOL) Support with Robust
Custom-Packet Detection
• Programmable LED Outputs for Link, Activity, and
Speed
• Baseline Wander Correction
• Quiet-WIRE® EMI Reduction (100BASE-TX)
• LinkMD® TDR-based Cable Diagnostic to Identify
Faulty Copper Cabling
• Signal Quality Indication
• Parametric NAND Tree Support to Detect Faults
Between Chip I/Os and Board
• Loopback Modes for Diagnostics
• Automatic MDI/MDI-X Crossover to Detect and
Correct Pair Swap at All Speeds of Operation
• Automatic Detection and Correction of Pair
Swaps, Pair Skew, and Pair Polarity
• MDC/MDIO Management Interface for PHY Reg-
ister Configuration
• Interrupt Pin Option
• Power-Down and Power-Saving Modes
• Operating Voltages
- Core (DVDDL, AVDDL, AVDDL_PLL): 1.2V
(External FET or Regulator)
- VDD I/O (DVDDH): 3.3V, 2.5V, or 1.8V
- Transceiver (AVDDH): 3.3V or 2.5V
• 64-pin QFN (8 mm × 8 mm) Package
2018-2021 Microchip Technology Inc.
DS00002840C-page 1