MASTER INSTRUMENT CORPORATION
VOLTAGE RANGE 50 to 1000 Volts
KBPC1505WN THRU KBPC1510WN
CURRENT
15 Amperes
FEATURES
l Low cost
l This series is UL recognized under component
index, file number E127707
AC
+
l High forward surge current capability
l Integrally molded heatsink provide very low thermal resistance
l High isolation voltage from case to lugs
l High temperature soldering guaranteed:
260oC/10 second, at 5 lbs. (2.3kg) tension.
0.732( 18.6)
0.692( 17.6)
0.47( 11.9)
0.43( 10.9)
-
AC
0.205( 5.2)
0.197( 5.0)
0.732( 18.6)
0.692( 17.6)
1.13( 28.8)
1.11( 28.2)
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Lead solderable per MIL-STD-202E
METAL HEAT SI NK
EXOPY CASE
0.32( 8.2)
0.30( 7.8)
method 208C.
0.78( 19.8) MIN
l Polarity: Polarity symbols molded on case
l Mounting: Thru hole for #6 screw, 5.0 in.-lbs torque max.
l Weight:0. 47ounce, 13.4 grams
0.042( 1.10) DIA
0.038( 0.97) TYP
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
KBPC
KBPC
KBPC
KBPC
KBPC
KBPC
1508WN 1510WN
KBPC
SYMBOLS
UNITS
15005WN 1501WN 1502WN 1504WN 1506WN
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
15
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Amps
Maximum DC Blocking Voltage
100
1000
Maximum Average Forward
Rectified Output Current, at TC=55℃(Note1, 2)
I(AV)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
300
Amps
Rating for Fusing(t<8.3ms)
Maximum Instantaneous Forward Voltage at 7.5A
I2T
VF
373
1.1
10
A2S
Volts
TA=25℃
mAmps
mAmps
Maximum DC Reverse Current at rated
DC blocking voltage
IR
1.0
TA=150℃
Isolation Voltage from case to lug
Typical Thermal Resistance (Note 1,2)
Operating Temperature Range
VISO
RqJC
TJ
2500
2.0
VAC
℃/W
℃
-55 to +150
-55 to +150
Storage Temperature Range
TSTG
℃
NOTES:
1.
2.
Unit mounted on 5”×4”×3” thick (12.8mm×10.2mm×7.3mm) Al. plate.
Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw.
Web Site:
WWW.PS-PFS.COM