KBJL4JU THRU KBJL4MU
Glass Passivated Single-Phase Bridge Rectifier
Reverse Voltage - 600V to 1000V
Forward Current - 4.0 Amperes
Features
◆ Thin Single In-Line package;
◆ Ideal for printed circuit boards;
◆ Glass Passivated chip junction;
◆ Low profile package;
◆ High Surge current capability;
◆ High case dielectric strength of 2000 VRMS
;
-
~
◆ Plastic package has Underwrites Laboratory
Flammability Classification 94V-0;
◆ Same footprint V.S KBJ (3S) package;
~
+
Mechanical Data
◆ Case: KBJL;
Epoxy meets UL-94V-0 Flammability rating;
◆ Terminals:Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102;
E3 suffix for customer grade, meet JESD 201
class 1A whisker test;
◆ High temperature soldering guaranteed:
Solder Dip 275℃,40seconds;
◆ Polarity: As marked on body;
◆ Mounting Torgue: 5.7cm-kg (5.0 inches-lbs) max;
◆ Recommend Torgue:Mounting Torgue:
5.7cm-kg (5inches-lbs);
Typical Applications
General purpose use in AC-to-DC bridge full wave rectification for
Switching Power Supply, Home Appliances, Office Equipment,
Industrial Automation applications.
Package Dimensions in mm
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
KBJL4JU KBJL4KU KBJL4MU
Symbol
Unit
Parameter
VRRM
VRMS
VDC
Maximum repetitive peak reverse voltage
Maximum RMS voltage
600
420
600
800
560
1000
700
V
V
V
Maximum DC blocking voltage
800
1000
4.0 (1)
2.4 (2)
TC=110℃
TA=25℃
Maximum average forward
rectified output current at
IF(AV)
Amps
Peak forward surge current 8.3 ms single sine-wave
superimposed on rated load (JEDEC Method)
IFSM
120
Amps
A2sec
Volt
I2t
VF
Rating for fusing (t<8.3ms)
60
0.96
5
Maximum Instantaneous forward voltage drop per leg at 2.0A
TA=25℃
Maximum DC Reverse Current at Rated
DC Blocking Voltage per leg
IR
μA
TA=125℃
150
26 (2)
2.2 (1)
RӨJA
RӨJC
Typical thermal resistance per leg
℃/W
TJ,TSTG
Operating junction and Storage Temperature Range
-55 to +150
℃
Notes:
1). Unit case mounted on Al plate heatsink;
2). Units mounted on PCB without heatsink;
3). Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw.