K4S561632C
CMOS SDRAM
PIN CONFIGURATION (Top view)
VDD
DQ0
VDDQ
DQ1
DQ2
VSSQ
DQ3
DQ4
VDDQ
DQ5
DQ6
VSSQ
DQ7
VDD
1
2
3
4
5
6
7
8
VSS
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
DQ15
VSSQ
DQ14
DQ13
VDDQ
DQ12
DQ11
VSSQ
DQ10
DQ9
VDDQ
DQ8
VSS
N.C/RFU
UDQM
CLK
CKE
A12
A11
A9
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
LDQM
WE
CAS
RAS
CS
BA0
BA1
A10/AP
A0
A8
A7
A6
A5
A4
VSS
A1
A2
A3
VDD
54Pin TSOP (II)
(400mil x 875mil)
(0.8 mm Pin pitch)
PIN FUNCTION DESCRIPTION
Pin
Name
System cock
Input Function
CLK
CS
Active on the positive going edge to sample all inputs.
Disables or enables device operation by masking or enabling all inputs except
CLK, CKE and DQM
Chip select
Masks system clock to freeze operation from the next clock cycle.
CKE should be enabled at least one cycle prior to new command.
Disable input buffers for power down in standby.
CKE
Clock enable
Row/column addresses are multiplexed on the same pins.
Row address : RA0 ~ RA12, Column address : CA0 ~ CA8
A0 ~ A12
BA0 ~ BA1
RAS
Address
Selects bank to be activated during row address latch time.
Selects bank for read/write during column address latch time.
Bank select address
Row address strobe
Column address strobe
Write enable
Latches row addresses on the positive going edge of the CLK with RAS low.
Enables row access & precharge.
Latches column addresses on the positive going edge of the CLK with CAS low.
Enables column access.
CAS
Enables write operation and row precharge.
Latches data in starting from CAS, WE active.
WE
Makes data output Hi-Z, tSHZ after the clock and masks the output.
Blocks data input when L(U)DQM active.
L(U)DQM
Data input/output mask
DQ0 ~ 15
VDD/VSS
Data input/output
Data inputs/outputs are multiplexed on the same pins.
Power and ground for the input buffers and the core logic.
Power supply/ground
Isolated power supply and ground for the output buffers to provide improved noise
immunity.
VDDQ/VSSQ
Data output power/ground
No connection
/reserved for future use
N.C/RFU
This pin is recommended to be left No Connection on the device.
Rev.0.1 Sept.2001