Datasheet > JD1BB-904

JD1BB-904

更新时间： 2024-11-30 19:52:35

品牌	Logo	应用领域
京瓷/艾维克斯 - KYOCERA AVX		/
页数	文件大小	规格书
4页	750K
描述
Feed Through Capacitor, 1 Function(s), 200V, 15A,

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

JD1BB-904 技术参数

生命周期：	Active	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8504.50.80.00
风险等级：	5.74	其他特性：	C-TYPE CIRCUIT
电容：	900000 µF	最大直流电阻：	0.006 Ω
滤波器类型：	FEED THROUGH CAPACITOR	最大插入损耗：	60 dB
最小绝缘电阻：	100 M Ω	JESD-609代码：	e0
安装类型：	PANEL MOUNT	功能数量：	1
最高工作温度：	125 °C	最低工作温度：	-55 °C
额定电流：	15 A	额定电压：	200 V
端子面层：	TIN LEAD	Base Number Matches：	1

JD1BB-904 数据手册

Cylindrical Style EMI Filters

JD Series – .690 Dia.

Hermetically Sealed – Circuits Available – C, L, π, T

APPLICATIONS

The JD series offers effective filtering from

14 KHz to 10 GHz. The large diameter,

increased length, restricted capacitance

values and conservative dielectrics of the

JD series are particularly important

design features for 400 Hz AC applica-

tions where high reactive currents and

the resultant heat dissipation must be

controlled. Glass sealed on both ends for

hermeticity, this series is impervious to

high moisture, solvents, or other severe

environmental conditions commonly

encountered in military applications. It is

designed for bulkhead mounting in a

slotted hole with nut and lockwasher

supplied.

inductors offer significant performance

advantages by suppressing and absorb-

ing the EMP pulse over a very broad

spectral range. Very high pulse currents

will occur within the EMI filter, however,

reradiation to sensitive electronic circuits

is prevented by the fully shielded case

design. In some cases a slight increase

in the case length of the filter is required

to provide space for the transient sup-

pression device.

The “L”, and the “T” designs are designed

to provide effective attenuation over a

wide range of circuit impedances. For

current ratings under 15 Amps toroidal

wound inductor elements offer increased

filter performance and protection against

circuit transients. Data showing the actual

inductance versus various levels of DC or

AC bias current are available as well as the

attenuation in any combination of source

and load impedance.

CHARACTERISTICS

• Designed to meet the require-

ments of DESC drawings

84083, 84084 and MIL-F-

28861/16 and /17.

The 230 VAC “T” section style is unique-

ly capable of handling very high pulse

inrush currents or overvoltage conditions

typical of EMP.

• Glass hermetic seal on both

ends.

In addition, transient voltage suppression

devices can be added to any of the JD

circuit designs to provide complete

circuit protection against EMP, lightning,

or voltage spikes such as MIL-STD-704.

These devices when combined with high

frequency attenuation characteristics of

the discoidal capacitor and toroidal

• Wound toroidal inductor used in

designs up to 10 Amps. 15

Amp designs incorporate ferrite

bead inductor.

Alternate lead configurations or special

capacitance/inductance values may be

ordered.

• Superior heat dissipation for

both 125 VAC and 230 VAC

designs.

Custom packages or filter arrays utilizing

the JD series can be furnished.

SPECIFICATIONS

1. Case/Terminal Plating:

Electro-tin standard –

C. Insulation Resistance:

At 25°C: 1,000 megohm-microfarad

min., or 50,000 megohms

min., whichever is less, at

the rated DC voltage

At 125°C: 100 megohm-microfarad

min., or 5,000 megohms

min., whichever is less

D. Dielectric Withstanding Voltage

(DWV):

5. Marking:

Standard Marking: AVX, AVX part

number, rated voltage, current, lot

number, schematic

Silver or gold available

2. Material:

Case: Brass standard – Steel available

End Seal: Mild steel

Terminals: Nickel-iron alloy

3. Operating Temperature Range:

-55°C to +125°C

NOTE: Schematic to indicate location of

inductor (standard or reverse) for

JD2 L-Section Filters.

See Reliability Codes section for

definition of Reliability Level marking.

See How to Order section for part

number construction.

4. Electrical Characteristics:

R-level designs:

A. Rated Voltage:

2.0 times rated DC voltage

Class B, Class S designs:

2.5 times rated DC voltage

3. Capacitance: Total capacitance listed in

chart for each filter type is “guaranteed

minimum value” (GMV)

6. Installation:

300 VDC/125 VAC, 400 Hz or

400 VDC/230 VAC, 400 Hz

B. Current Rating - see chart

A. Mounting Torque: 60 oz-in. 4 oz-in.

B. Refer to “Installation and Handling”

section of Filter Design Guide

12 3 4

中文翻译

下载PDF

与JD1BB-904相关器件

型号	品牌	获取价格	描述	数据表
JD1BBB454	KYOCERA AVX	获取价格	Cylindrical EMI Filters
JD1BBB904	KYOCERA AVX	获取价格	Cylindrical EMI Filters
JD1BBR454	KYOCERA AVX	获取价格	Cylindrical EMI Filters
JD1BBR904	KYOCERA AVX	获取价格	Cylindrical EMI Filters
JD1BBS454	KYOCERA AVX	获取价格	Cylindrical EMI Filters
JD1BBS904	KYOCERA AVX	获取价格	Cylindrical EMI Filters
JD1EB-154	KYOCERA AVX	获取价格	Feed Through Capacitor, 1 Function(s), 400V, 15A,
JD1EBB154	KYOCERA AVX	获取价格	Cylindrical EMI Filters
JD1EBR154	KYOCERA AVX	获取价格	Cylindrical EMI Filters
JD1EBS154	KYOCERA AVX	获取价格	Cylindrical EMI Filters

与JD1BB-904相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

53
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

42
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

70
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

66

产品中心

服务支持

精选活动

关于我们

帮助中心

JD1BB-904

JD1BB-904 技术参数

JD1BB-904 数据手册

与JD1BB-904相关器件

与JD1BB-904相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

JD1BB-904

JD1BB-904 技术参数

JD1BB-904 数据手册

与JD1BB-904相关器件

与JD1BB-904相关文章

您还可以找

您在本页遇到什么问题？