Datasheet > JAPD2-A-M2

JAPD2-A-M2

更新时间： 2024-11-08 02:06:19

品牌	Logo	应用领域
爱模 - MSYSTEM		/
页数	文件大小	规格书
4页	135K
描述
Plug-in Signal Conditioners M-UNIT

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

JAPD2-A-M2 数据手册

MODEL: JAPD2

RNG4 10 Hz: 0 – 20 Hz

RNG5 1 Hz: 0 – 2 Hz

RELATED PRODUCTS

• Programming Unit (model: PU-2x)

RNG6 100 mHz: 0 – 200 mHz

Min. span: 10 % of available frequency range

Duty ratio: 50 %

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

■ Open Collector: 50 V DC @50 mA (resistive load)

Saturation voltage: 0.6 V DC

■ Voltage Pulse

H level: Rating 5, 12 or 24 V ±10 %

L level: ≤ 0.5 V

GENERAL SPECIFICATIONS

Construction: Plug-in

Load resistance: ≥ 1 kΩ (5 V), ≥ 2.4 kΩ (12 V), ≥ 4.8 kΩ (24

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

■ Noncontact AC/DC Switch: 120 V AC or 120 V DC @200

mA (resistive load)

ON resistance: 3 Ω max.

Housing material: Flame-resistant resin (black)

Isolation: Input to alarm output to output to power

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Alarm output: Turns on when the input goes above (high) or

below (low) setpoint

Rise time: 5 msec.

Sink time: 3 msec.

■ RS-422 Line Driver Pulse

Transmitter: Conforms to RS-422

■ Relay Contact:

100 V AC @ 1 A (cos ø = 1)

Alarm setpoint: -5 – +105 %

120 V AC @ 1 A (cos ø = 1)

Alarm deadband (hysteresis): 0 – 20 %

Output monitor LED: Red LED turns on when the output is

ON or high.

240 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 1 A (resistive load)

Maximum switching voltage: 380 V AC or 125 V DC

Maximum switching power: 120 VA or 30 W

Minimum load: 5 V DC @ 10 mA

Power ON delay time: 2.0 to 1000.0 sec.

Software programming: Programming Unit (model: PU-2x);

(Refer to the users manual of JXCON for the adjustments

configurable with JXCON)

Mechanical life: 5 x 10 cycles (300 cycle/minute)

• Output frequency (zero and span)

• Alarm

INSTALLATION

Power input

• Power ON delay time

•AC: Operational voltage range 85 – 264 V, 47 - 66 Hz;

Approx. 3.2 VA at 100 V

• Others

Approx. 5.1 VA at 200 V

INPUT SPECIFICATIONS

■ DC Current:

Approx. 6.9 VA at 264 V

•DC: Operational voltage range: rating ±10 %, or 85 – 150 V

for 110 V rating (ripple 10 % p-p max.)

Approx. 2.5 W (100 mA at 24 V)

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: -300 – +300 V DC

Minimum span: 10 mV

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail

Offset: Max. 1.5 times span

Input resistance

Weight: 280 g (0.62 lb)

Span 10 – 100 mV : ≥ 10 kΩ

Span 0.1 – 1 V : ≥ 100 kΩ

Span ≥ 1 V : ≥ 1 MΩ

OUTPUT SPECIFICATIONS

Frequency range: 100 mHz to 10 kHz (RNG1 to RNG6)

[ Range name : Available frequency ]

RNG1 10 kHz: 0 – 20 kHz

RNG2 1 kHz: 0 – 2 kHz

RNG3 100 Hz: 0 – 200 Hz

JAPD2 SPECIFICATIONS

ES-1571 Rev.6 Page 2/4

http://www.m-system.co.jp/

123 4

中文翻译

下载PDF

与JAPD2-A-M2相关器件

型号	品牌	获取价格	描述	数据表
JAPD2-A-M2/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AM-M2	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AM-M2/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AM-P	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AM-P/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AM-R	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AM-R/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AM-S	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AM-S/Q	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT
JAPD2-AN-M2	MSYSTEM	获取价格	Plug-in Signal Conditioners M-UNIT

与JAPD2-A-M2相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

16
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

13
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

37
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

34

产品中心

服务支持

精选活动

关于我们

帮助中心

JAPD2-A-M2

JAPD2-A-M2 数据手册

与JAPD2-A-M2相关器件

与JAPD2-A-M2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

JAPD2-A-M2

JAPD2-A-M2 数据手册

与JAPD2-A-M2相关器件

与JAPD2-A-M2相关文章

您还可以找

您在本页遇到什么问题？