IXD2135/36
Synchronous 1A Step-Up DC/DC Converter
transistor capable of providing up to 1.0 A inductor
peak current.
FEATURES
o
o
Operating Input Voltage Range: 0.65 V ~ 6.5 V
Output Voltage Range: 1.8 V~5.0V with (0.1V
The IXD2135/36 are able to start operation at 0.9 V
input voltage to generate 3.3 V output voltage with a
33 Ω load resistor, which is suitable for mobile
equipment powered from a single Alkaline or Nickel
metal hydride battery.
increments, accuracy ±2.0%)
o
o
o
Oscillation Frequency: 1.2 MHz ± 15%
Built-in Switching 0.2 Ω NMOSFET
Build-in Synchronous Rectification 0.2 Ω
PMOSFET
The load disconnect function cuts the current
conduction path from input to output at shutdown
mode.
o
o
o
Operating Mode: PWM or PWM/PFM Auto
Selection
Protection: Over-Current Limit Latch, Thermal
Shutdown
The output voltage is selectable in 0.1 V increments
within 1.8 ~ 5.0 V (± 2.0% accuracy).
Functions: Under-Voltage Lockout, Soft Start,
Load Disconnect, Load Capacitor Auto
Discharge,
The Under-voltage Lockout (UVLO) function prevents
battery damage due deep discharge.
The UVLO threshold voltage is 0.85 V (B/K versions)
or 1.6V A/C versions), and are selectable in the
range from 0.9 V to 3.0 V.
o
o
Operating Ambient Temperature: -40 - +850C
Package: USP-10B (10-pin 2.6 x 2.9 x 0.6 mm)
o
EU RoHS Compliant, Pb Free
The IXD2135/36 requires only inductor and three
ceramic capacitors connected externally for normal
operations.
APPLICATION
o
o
o
Mobile phones
Cameras, VCRs
Maximum oscillation frequency is set at 1.2 MHz in
PWM mode and maximum duty cycle is set at 93%
making it suitable for use with large load current. The
IXD2135/36 are able switch automatically between
PWM and PFM modes to support both large and
small load currents.
Various portable equipment powered from 1
– 3 cell alkaline or 1 cell Li-ion batteries
DESCRIPTION
The IXD2135/36 are synchronous step-up DC/DC
converters with build-in a 0.2 Ω N-channel switching
transistor and a 0.2 Ω synchronous P-channel
The IXD2135/36 use small 10-pin 2.6 x 2.9 x 0.6 mm
USP-10B package.
TYPICAL APPLICATION CIRCUIT
TYPICAL PERFORMANCE CHARACTERISTIC
Efficiency vs. Output Current
IXD2135C32CDR-G (VOUT=3.2V)
L = 4.7 μH (VLF3014ST-4R7M1R1), CL = 22 μF (LMK316ABJ226ML), C = 10 μF (JMK212ABJ106KG),
IN
CDD = 0.47 μF (TMK107BJ474KA) fOSC=1.2MHz
© 2013 IXYS Corp.
Characteristics subject to change without notice
1
Doc. No. IXD2135_DS, Rev. N0