ISL9103, ISL9103A
®
Data Sheet
June 26, 2009
FN6828.1
500mA 2.4MHz Low I High Efficiency
Q
Features
Synchronous Buck Converter
• High Efficiency Integrated Synchronous Buck Regulator
with up to 95% Efficiency
The ISL9103, ISL9103A is a 500mA, 2.4MHz step-down
regulator, which is ideal for powering low-voltage
• 2.7V to 6.0V Supply Voltage
microprocessors in compact devices such as PDAs and
cellular phones. It is optimized for generating low output
voltages down to 0.8V. The supply voltage range is from
2.7V to 6V allowing the use of a single Li+ cell, three NiMH
cells or a regulated 5V input. It has guaranteed minimum
output current of 500mA. A high switching frequency of
2.4MHz pulse-width modulation (PWM) allows using small
external components. Under light load condition, the device
• 2.4MHz PWM Switching Frequency
• 500mA Guaranteed Output Current
• 3% Output Accuracy Over-Temperature and Line for Fixed
Output Options
• 20µA Quiescent Supply Current in Skip Mode
• Less than 1µA Logic Controlled Shutdown Current
• 100% Maximum Duty Cycle for Lowest Dropout
operates at low I skip mode with typical 20µA quiescent
Q
current for highest light load efficiency to maximize battery
life, and it automatically switches to fixed frequency PWM
mode under heavy load condition.
• Ultrasonic Switching Frequency at Skip Mode to Prevent
Audible Frequency Noise (For ISL9103A Only)
• Discharge Output Capacitor when Disabled
• Internal Digital Soft-Start
The ISL9103, ISL9103A includes a pair of low
ON-resistance P-Channel and N-Channel internal MOSFETs
to maximize system efficiency and minimize the external
component count. 100% duty-cycle operation allows less
than 300mV dropout voltage at 500mA.
• Peak Current Limiting, Short Circuit Protection
• Over-Temperature Protection
The ISL9103, ISL9103A offers internal digital soft-start,
enable for power sequence, overcurrent protection and
thermal shutdown functions. In addition, the ISL9103,
ISL9103A offers a quick bleeding function that discharges
the output capacitor when the IC is disabled.
• Chip Enable
• Small 6 Pin 1.6mmx1.6mm µTDFN Package
• Pb-Free (RoHS Compliant)
Applications
The ISL9103, ISL9103A is offered in a 1.6x1.6mm µTDFN
package. The complete converter occupies less than
• Single Li-ion Battery-Powered Equipment
• Mobile Phones and MP3 Players
• PDAs and Palmtops
2
0.5cm .
Pinout
• WCDMA Handsets
ISL9103, ISL9103A
(6 LD 1.6x1.6 µTDFN)
TOP VIEW
• Portable Instruments
VIN
EN
NC
1
2
3
6
5
4
SW
GND
FB
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.