ISL8601
®
Data Sheet
March 23, 2007
FN6449.0
PRELIMINARY*
*All functional details and specifications are preliminary and subject to change
Single-Phase, PMBus-Enabled PWM
Features
Controller with Integrated FET Drivers
• Input Voltage Range: +1.8V to 13.2V
• VBIAS Voltage Range: +4.5V to 13.2V
• Minimum Output Voltage: +0.5V
The ISL8601 is a single-phase PWM controller with integrated
MOSFET drivers utilizing analog voltage mode control. The
ISL8601 features extensive PMBus compliance that enables
rapid and flexible power supply design and comprehensive
product evaluation and testing. Exceptional flexibility in the
customization of operating parameters and system monitoring
functions is provided via the large PMBus command set. The
• ±1.0% System Accuracy Over the Range of -40°C to
+85°C When Using the 0.8V Reference
• Internal Reference Voltage Programmable from 0.4V to
0.9V in 4mV Steps
ISL8601 supports both low-side MOSFET r
and
DS(ON)
• Integrated 2A to 4A MOSFET Drivers
Inductor DCR current sensing. Programmable temperature
compensation for sensed current values is provided to ensure
maximum accuracy. In addition to the I C interface, select
PMBus commands for the ISL8601 can also be programmed
via external resistors, bringing the power and flexibility of
PMBus into low-cost power supply systems.
• External Frequency Synchronization
2
• Selectable Phase Delay: 0°, 90°, 120°, 180°, 240°, or 270°
• Precision MOSFET r
Sensing
or Inductor DCR Current
DS(ON)
• Voltage Feedforward Compensation
• Extensive PMBus Compliance
Ordering Information
PART NUMBER TEMP RANGE (°C) PACKAGE PKG. DWG. #
• Broad PMBus Programmability Including Output Voltage,
Overvoltage Threshold, Overcurrent Threshold,
Overtemperature Threshold, Switching Frequency, Turn-
On and Turn-Off
ISL8601IRZ
-40 to +85
40 Ld 6x6 QFN L40.6x6
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
• PMBus Monitoring of Load Current, Input Voltage, Output
Voltage and Temperature
2
• PMBus Programming Via I C Interface
• Resistor Programming of Select PMBus Parameters
• Operating Frequency Range: 200kHz to 2MHz
• Internal and External Temperature Measurement
Pinout
ISL8601
(40 LD 6x6 QFN)
• Overvoltage, Undervoltage and Overtemperature
Protection
• Low-Side and High-Side Overcurrent Protection
• Programmable Supply Sequencing and Tracking
• Digital Soft-Start with Multiple Soft-Start Modes
• Multiple Programmable Fault-Handling Modes
• Multiple Prebiased Startup Options
40 39 38 37 36 35 34 33 32 31
ROSC
ISENSN
ISENSP
N/C
1
2
3
4
5
6
7
8
9
30 RGND
29 PGND
28 LGATE
27
PVCC
GND
BOTTOM
SIDE PAD
N/C
26 PHASE
• Differential Remote Voltage Sensing
LSOC
AGND
C25A
SS
UGATE
BOOT
25
24
• Power-Good Output with Programmable Delay
23 HSOC
22 DGND
21 PGOOD
Applications
• Ethernet Routers and Switches
• Point-of-Load Modules
• Industrial Power Management
COMP 10
11 12 13 14 15 16 17 18 19 20
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.