ISL8484
®
Data Sheet
February 25, 2005
FN6128.0
Ultra Low ON-Resistance, +1.65V to +4.5V,
Single Supply, Dual SPDT Analog Switch
The Intersil ISL8484 device is a low ON-resistance, low
voltage, bidirectional, dual single-pole/double-throw (SPDT)
analog switch designed to operate from a single +1.65V to
+4.5V supply. Targeted applications include battery powered
Features
• Pb-Free Available as an Option (RoHS Compliant)
(see Ordering Info)
• Pin Compatible Replacement for the MAX4684 and
MAX4685
• ON Resistance (R
)
ON
equipment that benefit from low R
(0.23Ω) and fast
= 15ns). The digital logic
ON
- V+ = +4.3V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.23Ω
- V+ = +3.0V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.27Ω
- V+ = +1.8V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.45Ω
switching speeds (t
= 20ns, t
OFF
ON
input is 1.8V logic-compatible when using a single +3V supply.
With a supply voltage of 4.2V and logic high voltage of 2.85V
at both logic inputs, the part draws only 10µA max of I+
current.
• R
Matching Between Channels . . . . . . . . . . . . . . . . 0.03Ω
Flatness Across Signal Range . . . . . . . . . . . . . . . 0.03Ω
ON
• R
ON
Cell phones, for example, often face ASIC functionality
limitations. The number of analog input or GPIO pins may be
limited and digital geometries are not well suited to analog
switch performance. This part may be used to “mux-in”
additional functionality while reducing ASIC design risk. The
ISL8484 is offered in small form factor packages, alleviating
board space limitations.
• Single Supply Operation . . . . . . . . . . . . . . . +1.65V to +4.5V
• Low Power Consumption (P ). . . . . . . . . . . . . . . . <0.3µW
D
• Fast Switching Action (V+ = +4.3V)
- t
- t
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20ns
ON
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15ns
OFF
• ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .>9kV
• Guaranteed Break-before-Make
The ISL8484 is a committed dual single-pole/double-throw
(SPDT) that consist of two normally open (NO) and two
normally closed (NC) switches. This configuration can be
used as a dual 2-to-1 multiplexer. The ISL8484 is pin
compatible with the MAX4684 and MAX4685.
• 1.8V Logic Compatible (+3V supply)
• Low I+ Current when VinH is not at the V+ Rail
• Available in 10 lead 3x3 Thin DFN and 10 lead MSOP
TABLE 1. FEATURES AT A GLANCE
ISL8484
Applications
• Battery powered, Handheld, and Portable Equipment
- Cellular/mobile Phones
- Pagers
Number of Switches
SW
2
SPDT or 2-1 MUX
0.23Ω
4.3V R
ON
- Laptops, Notebooks, Palmtops
4.3V t /t
20ns/15ns
ON OFF
3V R
• Portable Test and Measurement
• Medical Equipment
• Audio and Video Switching
0.27Ω
ON
3V t /t
25ns/20ns
ON OFF
1.8V R
0.45Ω
ON
1.8V t /t
65ns/50ns
ON OFF
Packages
10 Ld 3x3 Thin DFN, 10 Ld MSOP
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.