ISL83386E
®
Data Sheet
November 19, 2004
FN6034.1
±15kV ESD Protected, +3V to +5.5V,
1 Microamp, 250kbps, RS-232
Transmitters/Receivers with Separate
Logic Supply
Features
• Pb-Free Available (RoHS Compliant)
• V Pin for Compatibility with Mixed Voltage Systems
L
• ESD Protection for RS-232 I/O Pins to ±15kV (IEC61000)
The ISL83386E contains 3.0V to 5.5V powered RS-232
transmitters/receivers which meet ElA/TIA-232 and
• Low Power, Pin Compatible Upgrade for MAX3386E and
SP3203E
V.28/V.24 specifications, even at V
= 3.0V. Targeted
CC
applications are PDAs, Palmtops, and cell phones where the
low operational, and even lower standby, power consumption
is critical. Efficient on-chip charge pumps, coupled with a
manual powerdown function reduces the standby supply
current to a 1µA trickle. Small footprint packaging, and the
use of small, low value capacitors ensure board space
savings as well. Data rates greater than 250kbps are
guaranteed at worst case load conditions.
• Single SHDN Pin Disables Transmitters and Receivers
• Meets EIA/TIA-232 and V.28/V.24 Specifications at 3V
• On-Chip Charge Pumps Require Only Four External
0.1µF Capacitors
• Receiver Hysteresis For Improved Noise Immunity
• Very Low Supply Current . . . . . . . . . . . . . . . . . . . . 300µA
• Guaranteed Minimum Data Rate . . . . . . . . . . . . . 250kbps
• Wide Power Supply Range. . . . . . . . Single +3V to +5.5V
• Low Supply Current in Powerdown State. . . . . . . . . < 1µA
The ISL83386E features a V pin that adjusts the logic pin
L
(see Pin Descriptions table) output levels and input
thresholds to values compatible with the V
external logic (e.g., a UART).
powering the
CC
The single pin powerdown function (SHDN = 0) disables all
the receiver and transmitter outputs, while shutting down the
charge pump to minimize supply current drain.
Applications
• Any System Requiring RS-232 Communication Ports
- Battery Powered, Hand-Held, and Portable Equipment
- Laptop Computers, Notebooks, Palmtops
- Digital Cameras
Table 1 summarizes the features of the ISL83386E, while
Application Note AN9863 summarizes the features of each
device comprising the 3V RS-232 family.
- PDA’s and PDA Cradles
- Cellular/Mobile Phones
Ordering Information
PART NUMBER
(BRAND)
TEMP.
RANGE ( C)
PKG. DWG.
#
o
PACKAGE
ISL83386EIV
(83386EIV)
-40 to 85
20 Ld TSSOP
M20.173
M20.173
M20.173
M20.173
ISL83386EIV-T
(83386EIV)
-40 to 85
-40 to 85
-40 to 85
Tape and Reel
ISL83386EIVZ
(83386EIVZ) (Note)
20 Ld TSSOP
(Pb-free)
ISL83386EIVZ-T
(83386EIVZ) (Note)
Tape and Reel
(Pb-free)
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding
compounds/die attach materials and 100% matte tin plate termination finish,
which are RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free products are MSL classified at Pb-free
peak reflow temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020C.
TABLE 1. SUMMARY OF FEATURES
NO. OF NO.OF DATARATE Rx. ENABLE LOGIC
PART
V
MANUAL
AUTOMATIC
L
NUMBER
Tx.
Rx.
(kbps)
FUNCTION?
SUPPLY PIN?
POWER- DOWN? POWERDOWN FUNCTION?
ISL83386E
3
2
250
NO
YES
YES
NO
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2004. All Rights Reserved
1