ISL83387E
®
Data Sheet
July 8, 2005
FN6040.1
+/-15kV ESD Protected, +3V to +5.5V,
1Microamp, 250kbps, RS-232
Features
• V Supply Pin for Compatibility with Mixed Voltage
L
Transceivers with Enhanced Automatic
Powerdown and a Separate Logic Supply
Systems
• ESD Protection for RS-232 I/O Pins to ±15kV (IEC61000)
• Low Power, Pin Compatible Upgrade for MAX3387E
• Manual and Enhanced Automatic Powerdown Features
• Meets EIA/TIA-232 and V.28/V.24 Specifications at 3V
The Intersil ISL83387E is a 3.0V to 5.5V powered RS-232
transceiver which meets ElA/TIA-232 and V.28/V.24
specifications, even at V
= 3.0V. Additionally, it provides
CC
±15kV ESD protection (IEC61000-4-2 Air Gap and Human
Body Model) on transmitter outputs and receiver inputs
(RS-232 pins). Targeted applications are PDAs, Palmtops,
and notebook and laptop computers where the low
• On-Chip Charge Pumps Require Only Four External
0.1µF Capacitors
operational, and even lower standby power consumption is
critical. Efficient on-chip charge pumps, coupled with manual
and enhanced automatic powerdown functions, reduce the
standby supply current to a 1µA trickle. TSSOP packaging,
and the use of small, low value capacitors ensure board
space savings as well. Data rates greater than 250kbps are
guaranteed at worst case load conditions.
• Receivers Stay Active in Powerdown
• Very Low Supply Current . . . . . . . . . . . . . . . . . . . . 300µA
• Guaranteed Minimum Data Rate . . . . . . . . . . . . . 250kbps
• Wide Power Supply Range . . . . . . . Single +3V to +5.5V
• Low Supply Current in Powerdown State. . . . . . . . . < 1µA
• Pb-Free Plus Anneal Available (RoHS Compliant)
The ISL83387E features a V pin that adjusts the logic pin
L
output levels and input thresholds to values compatible with
Applications
the V
powering the external logic (e.g., a UART).
CC
• Any System Requiring RS-232 Communication Ports
- Battery Powered, Hand-Held, and Portable Equipment
- Laptop Computers, Notebooks, Palmtops
- Digital Cameras
- PDA’s and PDA Cradles
- Cellular/Mobile Phones
This device includes an enhanced automatic powerdown
function which powers down the on-chip power-supply and
driver circuits. This occurs when all receiver and transmitter
inputs detect no signal transitions for a period of 30 seconds.
It power back up, automatically, whenever it senses a
transition on any transmitter or receiver input.
Table 1 summarizes the features of the ISL83387E, while
Application Note AN9863 summarizes the features of each
device comprising the 3V RS-232 family.
Ordering Information
PART NO.
(BRAND)
TEMP.
PKG.
RANGE (°C) PACKAGE
DWG. #.
ISL83387EIV
-40 to 85 24 Ld TSSOP M24.173
-40 to 85 Tape and Reel M24.173
(83387EIV)
ISL83387EIV-T
(83387EIV)
ISL83387EIVZ (Note)
(83387EIVZ)
-40 to 85 24 Ld TSSOP M24.173
(Pb-free)
ISL83387EIVZ-T (Note)
(83387EIVZ)
-40 to 85 Tape and Reel M24.173
(Pb-free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2005. All Rights Reserved