6A Low Quiescent Current High Efficiency Synchronous
Buck Regulator
ISL8016
Features
The ISL8016 is a high efficiency, monolithic, synchronous
step-down DC/DC converter that can deliver up to 6A continuous
output current from a 2.7V to 5.5V input supply. The output
• High Efficiency Synchronous Buck Regulator with up to 97%
Efficiency
• 1% Reference Accuracy Over-Temperature/Load/Line
• Fixed Output Voltage Option
voltage is adjustable from 0.6V to V . With an adjustable current
IN
limit, reverse current protection, pre-bias start and over
temperature protection the ISL8016 offers a highly robust power
solution. It uses current control architecture to deliver fast
transient response and excellent loop stability.
• ±10% Output Voltage Margining
• Adjustable Current Limit
• Current Sharing Capable
The ISL8016 integrates a pair of low ON-resistance P-Channel
and N-Channel internal MOSFETs to maximize efficiency and
minimize external component count. 100% duty-cycle operation
allows less than 200mV dropout at 6A output current. Adjustable
frequency and synchronization allow the ISL8016 to be used in
applications requiring low noise. Paralleling capability with
phase interleaving allows the IC to support >6A output current
while offering reduced input and output noise.
• Start-up with Pre-Biased Output
• Internal Soft-Start - 1ms or Adjustable, Internal/External
Compensation
• Soft-Stop Output Discharge During Disabled
• Adjustable Frequency from 500kHz to 4MHz - Default at 1MHz
• External Synchronization up to 4MHz - Master to Slave Phase
Shifting Capability
The ISL8016 can be configured for discontinuous or forced
continuous operation at light load. Forced continuous operation
reduces noise and RF interference while discontinuous mode
provides high efficiency by reducing switching losses at light loads.
• Peak current limiting, Hiccup Mode Short Circuit Protection
and Over-Temperature Protection‘
Applications
The ISL8016 is offered in a space saving 20 Ld 3x4 QFN lead free
package with exposed pad lead frames for excellent thermal
performance. The complete converter occupies less than 0.15in
• DC/DC POL Modules
2
• µC/µP, FPGA and DSP Power
• Plug-in DC/DC Modules for Routers and Switchers
• Portable Instruments
area.
Various fixed output voltages are available upon request. See
Ordering Information on page 2 for more detail.
• Test and Measurement Systems
• Li-ion Battery Powered Devices
100
95
3.3V
PFM
90
85
80
75
70
OUT
3.3V
PWM
OUT
0.0
1.0
2.0
3.0
(A)
4.0
5.0
6.0
I
OUT
FIGURE 1. EFFICIENCY T = +25°C V = 5V
IN
May 5, 2011
FN7616.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1