ISL8011
®
Data Sheet
July 11, 2006
FN9254.0
1.2A Integrated FETs, High Efficiency
Synchronous Buck Regulator
Features
• High Efficiency Synchronous Buck Regulator with Up to
95% Efficiency
ISL8011 is an integrated FET, 1.2A synchronous buck
regulator for general purpose point-of load applications. It is
optimized for generating low output voltages down to 0.8V.
The supply voltage range is from 2.7V to 5.5V allowing the
use from common 3.3V or 5V supply rails and Lithium ion
battery inputs. It has guaranteed minimum output current of
1.2A. 1.5MHz pulse-width modulation (PWM) switching
frequency allowing the use of small external components.
• 2.7V to 5.5V Supply Voltage
• 1.2A Guaranteed Output Current
• 100% Maximum Duty Cycle
• Peak Current Limiting, Short Circuit Protection
• 200ms Power-On Reset
The ISL8011 includes a pair of low on-resistance P-channel
and N-channel internal MOSFETs to maximize efficiency and
minimize external component count. 100% duty-cycle
operation allows less than 200mV dropout voltage at 1.2A.
• 3% Output Accuracy Over Temperature/Load/Line
• Less than 1µA Logic Controlled Shutdown Current
• Internal Loop Compensation
The ISL8011 offers a 200ms Power-On-Reset (POR) timer
at power-up. When shutdown, the ISL8011 discharges the
output capacitor. Other features include internal digital soft-
start, enable for power sequence, overcurrent protection,
and thermal shutdown.
• Internal Digital Soft-Start
• Over-Temperature Protection
• Enable
• Small 10 Ld 3x3mm DFN
The ISL8011 is offered in a 10 Ld 3x3mm DFN package with
1mm maximum height. The complete converter occupies
less than 1cm area.
• Pb-Free Plus Anneal Available (RoHS Compliant)
2
Applications
Ordering Information
• DC/DC POL Modules
TEMP.
RANGE
(°C)
• µC/µP, FPGA & DSP Power
• Plug-in DC/DC Modules for Routers and Switchers
• Portable Instruments
PART NUMBER
(NOTE)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL8011IRZ
011Z
011Z
-40 to 85 10 Ld 3x3 DFN L10.3x3
-40 to 85 10 Ld 3x3 DFN L10.3x3
• Test and Measurement Systems
ISL8011IRZ-T
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Pinout
ISL8011 (10 LD 3x3 DFN)
TOP VIEW
PVIN
PHASE
1
2
3
4
5
10
9
VCC
EN
PGND
SGND
FB
8
POR
GND
7
6
N/C
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.