ISL6571
®
Data Sheet
April 18, 2005
FN9082.4
Complementary MOSFET Driver and
Synchronous Half-Bridge Switch
Features
• Improved Performance over Conventional Synchronous
Buck Converter using Discrete Components
• Optimal Deadtime Provided by Adaptive Shoot-Through
• Switching Frequency up to 1MHz
- High-Bandwidth, Fast Transient Response
- Small, Low Profile Converters
• Reduced Connection Parasitics between Discrete
Components
- Low Electromagnetic Emissions
• Low Profile, Low Thermal Impedance Packaging
- High Power Density Applications
• QFN Package:
The Intersil ISL6571 provides a new approach for
implementing a synchronous rectified buck switching
regulator. The ISL6571 replaces two power MOSFETs, a
Schottky diode, two gate drivers and synchronous control
circuitry. Its main applications address high-density power
conversion circuits including multiphase-topology computer
microprocessor core power regulators, ASIC and memory
array regulators, etc. Another useful feature of the ISL6571
is the compatibility with three-state input control: left open,
the PWM input turns off both output drives. The ISL6571
operates in continuous conduction mode reducing EMI
constraints and enabling high bandwidth operation.
- Compliant to JEDEC PUB95 MO-220
QFN - Quad Flat No Leads - Package Outline
- Near Chip Scale Package footprint, which improves
PCB efficiency and has a thinner profile
Ordering Information
TEMP.
PKG.
PART NUMBER RANGE (°C)
PACKAGE
DWG. #
• Pb-Free Available (RoHS Compliant)
ISL6571CR*
0 to 70
0 to 70
68 Ld 10x10 QFN L68.10x10A
ISL6571CRZ*
(See Note)
68 Ld 10x10 QFN L68.10x10A
(Pb-free)
Applications
•
•
Multiphase Power Regulators
Low-Voltage Switchmode Power Conversion
ISL6571EVAL1
Evaluation Board
*Add “-T” suffix for tape and reel.
• High-Density Power Converters
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003-2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.