ISL6540
®
Data Sheet
March 9, 2006
FN9214.0
Single-Phas e Buck PWM Controller with
Integrated High Speed MOSFET Driver
and Pre-Bias ed Load Capability
Features
• VIN and Power Rail Operation from +3.3V to +20V
• Fast Transient Response - 0 to 100% Duty Cycle
- 15MHz Bandwidth Error Amplifier with 6V/µs Slew Rate
- Voltage-Mode PWM Leading and Trailing-edge
Modulation Control
- Input Voltage Feedforward Compensation
• 2.9V to 5.6V High Speed 2A/4A MOSFET Gate Drivers
- Tri-state for Power Stage Shutdown
The ISL6540 is a single-phase voltage-mode PWM controller
with input voltage feedforward compensation to maintain a
constant loop gain for optimal transient response, especially for
applications with a wide input voltage range. Its integrated high
speed synchronous rectified MOSFET drivers and other
sophisticated features provide complete control and protection
for a DC/DC converter with minimum external components,
resulting in minimum cost and less engineering design efforts.
• Internal Linear Regulator (LR) - 5.6V Bias from VIN
• External LR Drive for Optimal Thermal Performance
• Voltage Margining with Independently Adjustable Upper and
The output voltage of the converter can be precisely regulated
with an internal reference voltage of 0.591V, and has a system
tolerance of ±0.85% over commercial temperature and line load
variations. An external voltage can be used in place of the
internal reference for voltage tracking/DDR applications.
Lower Settings for System Stress Testing & Over Clocking
• Reference Voltage I/O for DDR/Tracking Applications
• Precise 0.591V Internal Reference with Buffered Output
- ±0.85%/±1.25% Over Commercial/Industrial Range
• Source and Sink Overcurrent Protections
The ISL6540 has an internal linear regulator or external linear
regulator drive options for applications with only a single supply
rail. The internal oscillator is adjustable from 250kHz to 2MHz.
The integrated voltage margining, programmable pre-biased
soft-start, differential remote sensing amplifier, and
programmable input voltage POR features enhance the
ISL6540 value.
- Low- and High-Side MOSFET r
Sensing
DS(ON)
• Overvoltage and Undervoltage Protections
• Small Converter Size - QFN package
• Oscillator Programmable from 250kHz to 2MHz
• Differential Remote Voltage Sensing with Unity Gain
• Programmable Soft-start with Pre-Biased Load Capability
• Power Good Indication with Programmable Delay
• EN Input with Voltage Monitoring Capability
• Pb-Free Plus Anneal Available (RoHS Compliant)
Pinout
ISL6540
(28 LD 5x5 QFN)
TOP VIEW
Applications
• Power Supply for some Microprocessors and GPUs
• Wide and Narrow Input Voltage Range Buck Regulators
• Point of Load Applications
28 27 26 25 24 23 22
VSEN+
VSEN-
REFOUT
REFIN
SS
1
2
3
4
5
6
7
21 BOOT
20 UGATE
19 PHASE
• Low-Voltage and High Current Distributed Power Supplies
Ordering Information
GND
BOTTOM
SIDE PAD
PART
PGND
LGATE
PVCC
18
17
16
15
NUMBER*
(Note)
PART
TEMP.
PACKAGE PKG.
MARKING RANGE (°C) (Pb-Free) DWG. #
ISL6540CRZ
ISL6540CRZ
0 to 70
0 to 70
28 Ld QFN L28.5x5
28 Ld QFN L28.5x5
OFS+
ISL6540CRZA ISL6540CRZ
ISL6540IRZ ISL6540IRZ
LINDRV
OFS-
-40 to 85 28 Ld QFN L28.5x5
-40 to 85 28 Ld QFN L28.5x5
8
9
10 11 12 13 14
ISL6540IRZA ISL6540IRZ
*Add “-T” suffix for tape and reel.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.