ISL6532A
®
Data Sheet
May 5, 2008
FN9099.5
ACPI Regulator/Controller for Dual
Channel DDR Memory Systems
Features
• Generates 3 Regulated Voltages
The ISL6532A provides a complete ACPI compliant power
solution for up to 4 DIMM dual channel DDR/DDR2 Memory
systems. Included are both a synchronous buck controller
- Synchronous Buck PWM Controller with Standby LDO
- 3A Integrated Sink/Source Linear Regulator with
Accurate VDDQ/2 Divider Reference.
and integrated LDO to supply V
with high current during
DDQ
- Glitch-free Transitions During State Changes
- LDO Regulator for 1.5V Video and Core voltage
S0/S1 states and standby current during S3 state. During
S0/S1 state, a fully integrated sink-source regulator
generates an accurate (V
/2) high current V voltage
• Acpi Compliant Sleep State Control
DDQ
TT
without the need for a negative supply. A buffered version of
the V /2 reference is provided as V . An LDO
• Integrated V
Buffer
REF
DDQ
REF
controller is also integrated for AGP core voltage regulation.
• PWM Controller Drives Low Cost N-Channel MOSFETs
• 250kHz Constant Frequency Operation
The switching PWM controller drives two N-Channel
MOSFETs in a synchronous-rectified buck converter
topology. The synchronous buck converter uses voltage-
mode control with fast transient response. Both the switching
regulator and standby LDO provide a maximum static
regulation tolerance of ±2% over line, load, and temperature
ranges. The output is user-adjustable by means of external
resistors down to 0.8V.
• Tight Output Voltage Regulation
- All Outputs: ±2% Over-Temperature
• 5V or 3.3V Down Conversion
• Fully-Adjustable Outputs with Wide Voltage Range: Down
to 0.8V supports DDR and DDR2 Specifications
• Simple Single-Loop Voltage-Mode PWM Control Design
• Fast PWM Converter Transient Response
• Under and Overvoltage Monitoring on All Outputs
• OCP on the Switching Regulator
Switching memory core output between the PWM regulator
and the standby LDO during state transitions is
accomplished smoothly via the internal ACPI control
circuitry. The NCH signal provides synchronized switching of
a backfeed blocking switch during the transitions eliminating
the need to route 5V Dual to the memory supply.
• Integrated Thermal Shutdown Protection
• QFN Package Option
An integrated soft-start feature brings all outputs into
regulation in a controlled manner when returning to S0/S1
state from any sleep state. During S0 the PGOOD signal
- QFN Compliant to JEDEC PUB95 MO-220 QFN - Quad
Flat No Leads - Product Outline
indicates V is within spec and operational.
TT
- QFN Near Chip Scale Package Footprint; Improves
PCB Efficiency, Thinner in Profile
Each output is monitored for under and overvoltage events.
The switching regulator has overcurrent protection. Thermal
shutdown is integrated.
• Pb-free Available (RoHS Compliant)
Ordering Information
Applications
TEMP.
•
Single and Dual Channel DDR Memory Power Systems in
ACPI compliant PCs
PART
NUMBER
PART
MARKING
RANGE
(°C)
PKG.
PACKAGE DWG. #
,
ISL6532ACR* ** ISL 6532ACR 0 to +70 28 Ld 6x6 QFN L28.6x6
•
Graphics Cards - GPU and Memory Supplies
,
ISL6532ACRZ* ** ISL6532 ACRZ 0 to +70 28 Ld 6x6 QFN L28.6x6
• ASIC Power Supplies
(Note)
(Pb-free)
• Embedded Processor and I/O Supplies
• DSP Supplies
ISL6532AIRZ*
(Note)
ISL6532 AIRZ -40 to +85 28 Ld 6x6 QFN L28.6x6
(Pb-free)
*Add “-T” suffix for tape and reel.
**Add “-TK” suffix for tape and reel. Please refer to TB347 for details on
reel specifications
NOTE: These Intersil Pb-free plastic packaged products employ special
Pb-free material sets; molding compounds/die attach materials and 100%
matte tin plate PLUS ANNEAL - e3 termination finish, which is RoHS
compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002-2004, 2007. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.