ISL6522
®
Data Sheet
March 4, 2005
FN9030.7
Buck and Synchronous Rectifier
Features
• Drives two N-Channel MOSFETs
Pulse-Width Modulator (PWM) Controller
The ISL6522 provides complete control and protection for a
DC-DC converter optimized for high-performance micro-
processor applications. It is designed to drive two N-Channel
MOSFETs in a synchronous rectified buck topology. The
ISL6522 integrates all of the control, output adjustment,
monitoring and protection functions into a single package.
• Operates from +5V or +12V input
• Simple single-loop control design
- Voltage-mode PWM control
• Fast transient response
- High-bandwidth error amplifier
- Full 0–100% duty ratio
The output voltage of the converter can be precisely
regulated to as low as 0.8V, with a maximum tolerance of
±1% over temperature and line voltage variations.
• Excellent output voltage regulation
- 0.8V internal reference
The ISL6522 provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is
adjustable from below 50kHz to over 1MHz. The error
amplifier features a 15MHz gain-bandwidth product and
6V/µs slew rate which enables high converter bandwidth for
fast transient performance. The resulting PWM duty ratio
ranges from 0–100%.
- ±1% over line voltage and temperature
• Overcurrent fault monitor
- Does not require extra current sensing element
- Uses MOSFETs r
DS(ON)
• Converter can source and sink current
• Small converter size
- Constant frequency operation
- 200kHz free-running oscillator programmable from
The ISL6522 protects against overcurrent conditions by
inhibiting PWM operation. The ISL6522 monitors the current
50kHz to over 1MHz
by using the r
of the upper MOSFET which eliminates
• 14-lead SOIC and TSSOP package and 16-lead 5x5mm
QFN Package
DS(ON)
the need for a current sensing resistor.
• QFN Package
- Compliant to JEDEC PUB95 MO-220 QFN-Quad Flat
No Leads-Product Outline.
- Near Chip-Scale Package Footprint; Improves PCB
Efficiency and Thinner in Profile
SOIC, TSSOP
Pinouts
TOP VIEW
14
13
12
11
10
9
RT
OCSET
SS
1
2
3
4
5
6
7
VCC
PVCC
LGATE
PGND
BOOT
UGATE
PHASE
• Pb-Free Available (RoHS Compliant)
COMP
FB
Applications
• Power supply for Pentium , Pentium Pro, PowerPC and
AlphaPC™ microprocessors
EN
®
®
8
GND
QFN
• High-power 5V to 3.xV DC-DC regulators
• Low-voltage distributed power supplies
TOP VIEW
16 15 14 13
SS
COMP
FB
1
2
3
4
12 PVCC
11 LGATE
10 PGND
GND
EN
9
BOOT
5
6
7
8
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
1
Copyright © Intersil Americas Inc. 2001, 2002, 2004, 2005. All Rights Reserved
®
®
PowerPC is a trademark of IBM. AlphaPC™ is a trademark of Digital Equipment Corporation. Pentium is a registered trademark of Intel Corporation.