ISL6522
®
Data Sheet
November 2002
FN9030.3
Buck and Synchronous Rectifier
Features
Pulse-Width Modulator (PWM) Controller
• Drives two N-Channel MOSFETs
• Operates from +5V or +12V input
The ISL6522 provides complete control and protection for a
DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive two
N-Channel MOSFETs in a synchronous rectified buck
topology. The ISL6522 integrates all of the control, output
adjustment, monitoring and protection functions into a single
package.
• Simple single-loop control design
- Voltage-mode PWM control
• Fast transient response
- High-bandwidth error amplifier
- Full 0–100% duty ratio
The output voltage of the converter can be precisely
regulated to as low as 0.8V, with a maximum tolerance of
±1% over temperature and line voltage variations.
• Excellent output voltage regulation
- 0.8V internal reference
- ±1% over line voltage and temperature
The ISL6522 provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is
adjustable from below 50kHz to over 1MHz. The error
amplifier features a 15MHz gain-bandwidth product and
6V/µs slew rate which enables high converter bandwidth for
fast transient performance. The resulting PWM duty ratio
ranges from 0–100%.
• Overcurrent fault monitor
- Does not require extra current sensing element
- Uses MOSFETs r
DS(ON)
• Converter can source and sink current
• Small converter size
- Constant frequency operation
- 200kHz free-running oscillator programmable from
50kHz to over 1MHz
The ISL6522 protects against overcurrent conditions by
inhibiting PWM operation. The ISL6522 monitors the current
• 14-lead SOIC and TSSOP package and 16-lead 5x5mm
MLFP Package
by using the r
of the upper MOSFET which eliminates
DS(ON)
the need for a current sensing resistor.
• MLFP Package
- Compliant to JEDEC PUB95 MO-220 QFN-Quad Flat
No Leads-Product Outline.
Pinout
TOP VIEW
- Near Chip-Scale Package Footprint; Improves PCB
Efficiency and Thinner in Profile
SOIC
and
TSSOP
14
13
12
11
10
9
RT
1
2
3
4
5
6
7
VCC
PVCC
LGATE
PGND
BOOT
UGATE
PHASE
OCSET
SS
Applications
®
®
• Power supply for Pentium , Pentium Pro, PowerPC and
AlphaPC™ microprocessors
COMP
FB
EN
• High-power 5V to 3.xV DC-DC regulators
• Low-voltage distributed power supplies
8
GND
TOP VIEW
Ordering Information
TEMP.
PKG.
NO.
MLFP
o
PART NUMBER RANGE ( C)
PACKAGE
14 Ld SOIC
16 15 14 13
ISL6522CB
ISL6522IB
ISL6522CV
ISL6522IV
ISL6522CR
ISL6522IR
0 to 70
-40 to 85
0 to 70
M14.15
MLFP
SS
COMP
FB
1
PVCC
12
11
10
9
14 Ld SOIC
M14.15
2
LGATE
PGND
BOOT
14 Ld TSSOP
14 Ld TSSOP
16 Ld 5x5 MLFP
16 Ld 5x5 MLFP
M14.173
M14.173
L16.5x5B
L16.5x5B
GND
3
4
-40 to 85
0 to 70
EN
5
6
7
8
-40 to 85
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
1
Copyright © Intersil Americas Inc. 2002, All Rights Reserved
®
®
PowerPC is a trademark of IBM. AlphaPC™ is a trademark of Digital Equipment Corporation. Pentium is a registered trademark of Intel Corporation.