ISL6443A
®
Data Sheet
December 7, 2007
FN6600.1
300kHz Dual, 180° Out-of-Phase, Step-Down
PWM and Single Linear Controller
Features
• Wide Input Supply Voltage Range
- Variable 5.6V to 24V
The ISL6443A is a high-performance, triple-output controller
optimized for converting wall adapter, battery or network
intermediate bus DC input supplies into the system supply
voltages required for a wide variety of applications. Each
output is adjustable down to 0.8V. The two PWMs are
synchronized at 180° out of phase, thus reducing the RMS
input current and ripple voltage.
- Fixed 4.5V to 5.6V
• Three Independently Programmable Output Voltages
• Switching Frequency . . . . . . . . . . . . . . . . . . . . . . .300kHz
• Out of Phase PWM Controller Operation
- Reduces Required Input Capacitance and Power
Supply Induced Loads
The ISL6443A incorporates several protection features. An
adjustable overcurrent protection circuit monitors the output
current by sensing the voltage drop across the lower
MOSFET. Hiccup mode overcurrent operation protects the
DC/DC components from damage during output
• No External Current Sense Resistor
- Uses Lower MOSFET’s r
DS(ON)
• Bidirectional Frequency Synchronization for
Synchronizing Multiple ISL6443As
overload/short circuit conditions. Each PWM has an
independent logic-level shutdown input (SD1 and SD2).
• Programmable Soft-Start
A single PGOOD signal is issued when soft-start is complete
on both PWM controllers and their outputs are within 10% of
the set point and the linear regulator output is greater than
75% of its setpoint. Thermal shutdown circuitry turns off the
device if the junction temperature exceeds +150°C.
• Extensive Circuit Protection Functions
- PGOOD
- UVLO
- Overcurrent
- Over-temperature
- Independent Shutdown for Both PWMs
Ordering Information
• Excellent Dynamic Response
TEMP.
- Voltage Feed-Forward with Current Mode Control
PART
NUMBER
PART
MARKING
RANGE
(°C)
PKG.
DWG. #
PACKAGE
• QFN Packages:
ISL6443AIRZ* 6443A IRZ
(See Note)
-40 to +85 28 Ld 5x5 QFN L28.5x5
(Pb-free)
- QFN - Compliant to JEDEC PUB95 MO-220
QFN - Quad Flat No Leads - Package Outline
ISL6443AIVZ* 6443A IVZ
(See Note)
-40 to +85 28 Ld TSSOP M28.173
(Pb-free)
- Near Chip Scale Package Footprint, which Improves
PCB Efficiency and has a Thinner Profile
Add “-TK” suffix for tape and reel. Please refer to TB347 for details
on reel specifications.
• Pb-Free (RoHS Compliant)
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach
materials and 100% matte tin plate PLUS ANNEAL - e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Applications
• Power Supplies with Multiple Outputs
• xDSL Modems/Routers
• DSP, ASIC, and FPGA Power Supplies
• Set-Top Boxes
• Dual Output Supplies for DSP, Memory, Logic, µP Core
and I/O
• Telecom Systems
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.