ISL62871, ISL62872
Data Sheet
May 8, 2014
FN6707.1
PWM DC/DC Controller With VID Inputs
For Portable GPU Core-Voltage Regulator
Features
• Input Voltage Range: 3.3V to 25V
• Output Voltage Range: 0.5V to 3.3V
• Output Load up to 30A
The ISL62871 and ISL62872 IC’s are Single-Phase
Synchronous-Buck PWM voltage regulators featuring
3
Intersil’s Robust Ripple Regulator (R ) Technology™. The
wide 3.3V to 25V input voltage range is ideal for systems
that run on battery or AC-adapter power sources. The
ISL62871 and ISL62872 are low-cost solutions for
applications requiring dynamically selected slew-rate
controlled output voltages. The soft-start and dynamic
setpoint slew-rates are capacitor programmed. Voltage
identification logic-inputs select two (ISL62871) or four
(ISL62872) resistor-programmed setpoint reference voltages
that directly set the output voltage of the converter between
0.5V to 1.5V, and up to 3.3V using a feedback voltage
divider. Optionally, an external reference such as the DAC
output from a microcontroller, can be used by either IC to
program the setpoint reference voltage, and still maintain the
controlled slew-rate features. Robust integrated MOSFET
drivers and Schottky bootstrap diode reduce the
• Extremely Flexible Output Voltage Programmability
- 2-Bit VID (ISL62872) Selects Four Independent
Setpoint Voltages
- 1-Bit VID (ISL62871) Selects Two Independent Setpoint
Voltages
- Simple Resistor Programming of Setpoint Voltages
- Accepts External Setpoint Reference Such as DAC
• ±0.75% System Accuracy: -10°C to +100°C
• One Capacitor Programs Soft-start and Setpoint Slew-rate
• Fixed 300kHz PWM Frequency in Continuous Conduction
• External Compensation Affords Optimum Control Loop
Tuning
• Automatic Diode Emulation Mode for Highest Efficiency
implementation area and lower component cost.
• Integrated High-current MOSFET Drivers and Schottky
Boot-Strap Diode for Optimal Efficiency
3
Intersil’s R Technology™ combines the best features of
both fixed-frequency and hysteretic PWM control. The PWM
frequency is 300kHz during static operation, becoming
variable during changes in load, setpoint voltage, and input
voltage when changing between battery and AC-adapter
power. The modulators ability to change the PWM switching
frequency during these events in conjunction with external
loop compensation produces superior transient response.
For maximum efficiency, the converter automatically enters
diode-emulation mode (DEM) during light-load conditions
such as system standby.
• Choice of Overcurrent Detection Schemes
- Lossless Inductor DCR Current Sensing
- Precision Resistive Current Sensing
• Power-Good Monitor for Soft-Start and Fault Detection
• Fault Protection
- Undervoltage
- Overvoltage
- Overcurrent (DCR-Sense or Resistive-Sense
Capability)
- Over-Temperature Protection
- Fault Identification by PGOOD Pull-Down Resistance
• Pb-Free (RoHS compliant)
Applications
• Mobile PC Graphical Processing Unit VCC rail
• Mobile PC I/O Controller Hub (ICH) VCC rail
• Mobile PC Memory Controller Hub (GMCH) VCC rail
• Built-in voltage margin for system-level test
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas LLC 2008, 2014. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
5秒后页面跳转
STM32H743技术深度剖析与应用案例探索
LM321中文资料解析：引脚功能介绍、技术特点、技术特性分析
74HC14芯片资料介绍：性能特性分析、引脚介绍
LM1875芯片手册：功放参数分析、引脚说明、电路设计要点
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
