ISL6236
®
Data Sheet
February 1, 2007
FN6373.2
High-Efficiency, Quad-Output, Main Power
Supply Controllers for Notebook
Computers
Features
• Wide Input Voltage Range 5.5V to 25V
• Dual Fixed 1.05V/3.3V and 1.5V/5.0V Outputs or
Adjustable 0.7V to 5.5V (SMPS1) and 0V to 2.5V
(SMPS2), ±1.5% Accuracy
The ISL6236 dual step-down, switch-mode power-supply
(SMPS) controller generates logic-supply voltages in
battery-powered systems. The ISL6236 include two
• Secondary Feedback Input (Maintains Charge Pump
Voltage)
pulse-width modulation (PWM) controllers, 5V/3.3V and
1.5V/1.05V. The output of SMPS1 can also be adjusted from
0.7V to 5.5V. The SMPS2 output can be adjusted from 0V to
2.5V by setting REFIN2 voltage. An optional external charge
pump can be monitored through SECFB. This device feature
a linear regulator providing 3.3V/5V, or adjustable from 0.7V to
4.5V output via LDOREFIN. The linear regulator provides up
to 100mA output current with automatic linear-regulator
bootstrapping to the BYP input. When in switchover, the LDO
output can source up to 200mA. The ISL6236 includes
on-board power-up sequencing, the power-good (POK )
outputs, digital soft-start, and internal soft-stop output
discharge that prevents negative voltages on shutdown.
• 1.7ms Digital Soft-Start and Independent Shutdown
• Fixed 3.3V/5.0V, or Adjustable Output 0.7V to 4.5V,
±1.5% (LDO): 200mA
• 3.3V Reference Voltage ±2.0%: 5mA
• 2.0V Reference Voltage ±1.0%: 50µA
• Constant ON-TIME Control with 100ns Load-Step
Response
• Frequency Selectable
• r
Current Sensing
DS(ON)
A constant on-time PWM control scheme operates without
sense resistors and provides 100ns response to load
transients while maintaining a relatively constant switching
frequency. The unique ultrasonic pulse-skipping mode
maintains the switching frequency above 25kHz, which
eliminates noise in audio applications. Other features include
pulse skipping, which maximizes efficiency in light-load
applications, and fixed-frequency PWM mode, which reduces
RF interference in sensitive applications.
• Programmable Current Limit with Foldback Capability
• Selectable PWM, Skip or Ultrasonic Mode
• BOOT Voltage Monitor with Automatic Refresh
• Independent POK1 and POK2 Comparators
• Soft-Start with Pre-Biased Output and Soft-Stop
• Independent ENABLE
• High Efficiency - up to 97%
Ordering Information
• Very High Light Load Efficiency (Skip Mode)
• 5mW Quiescent Power Dissipation
TEMP.
PART
NUMBER
PART
MARKING
RANGE
(°C)
PKG.
DWG. #
PACKAGE
• Thermal Shutdown
ISL6236IRZA
(Note)
ISL6236 IRZ -40 to +100 32 Ld 5x5 QFN L32.5x5B
(Pb-free)
• Extremely Low Component Count
• Pb-Free Plus Anneal Available (RoHS Compliant)
ISL6236IRZA-T ISL6236 IRZ -40 to +100 32 Ld 5x5 QFN L32.5x5B
(Note)
(Pb-free)
(Tape and Reel)
Applications
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
• Notebook and Sub-Notebook Computers
• PDAs and Mobile Communication Devices
• 3-Cell and 4-Cell Li+ Battery-Powered Devices
• DDR1, DDR2, and DDR3 Power Supplies
• Graphic Cards
• Game Consoles
• Telecommunications
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006, 2007. All Rights Reserved
1
All other trademarks mentioned are the property of their respective owners.