ISL6218
®
Data Sheet
August 6, 2007
FN9101.6
Precision Single-Phase Buck PWM
Controller for Intel Mobile Voltage
Positioning IMVP-IV™ and IMVP-IV+™
The ISL6218 Single-Phase Buck PWM control IC, with
integrated half bridge gate driver, provides a precision
voltage regulation system for advanced Pentium-M
microprocessors in notebook computers. This control IC also
features both input voltage feed-forward and average current
mode control for excellent dynamic response, “Loss-less”
current sensing using MOSFET rDS(ON), and user selectable
switching frequencies from 250kHz to 500kHz per phase.
Features
• IMVP-IV™ Compliant CORE Regulator
• Single-Phase Power Conversion
• “Loss-less” Current Sensing for Improved Efficiency and
Reduced Board Area
- Optional Discrete Precision Current Sense Resistor
• Internal Gate Drive and Boot-Strap Diode
• Precision CORE Voltage Regulation
- 0.8% System Accuracy Over-temperature
• 6-Bit Microprocessor Voltage Identification Input
The ISL6218 includes a 6-bit digital-to-analog converter
(DAC) that dynamically adjusts the CORE PWM output
voltage from 0.700V to 1.708V in 16mV steps, and conforms
to the Intel IMVP-IV™ mobile VID specification. The ISL6218
also has logic inputs to select Active, Deep Sleep and
Deeper Sleep modes of operation. A precision reference,
remote sensing and proprietary architecture with integrated
processor-mode compensated “Droop” provides excellent
static and dynamic CORE voltage regulation.
• Programmable “Droop” and CORE Voltage Slew Rate to
Comply with IMVP-IV™ Specification
• Discontinuous Mode Of Operation for Increased Light
Load Efficiency in Deep and Deeper Sleep Mode
• Direct Interface with System Logic (STP_CPU and
DPRSLPVR) for Deep and Deeper Sleep Modes of
Operation
• Easily Programmable Voltage Setpoints for Initial “Boot”,
Deep Sleep and Deeper Sleep Modes
Another feature of the ISL6218 IC controller is the internal
PGOOD delay circuit that holds the PGOOD pin low for
3ms to 12ms after the VCCP and VCC_MCH regulators are
within regulation. This PGOOD signal is masked during VID
changes. Output overvoltage and undervoltage are
monitored and result in the converter latching off and
PGOOD signal being held low.
• Excellent Dynamic Response
- Combined Voltage Feed-Forward and Average Current
Mode Control
• Overvoltage, Undervoltage and Overcurrent Protection
• Power-good Output with Internal Blanking During VID and
Mode Changes
The overvoltage and undervoltage thresholds are 112% and
84% of the VID, Deep or Deeper Sleep setpoint. Overcurrent
protection features a 32 cycle overcurrent shutdown.
PGOOD, Overvoltage, Undervoltage and Overcurrent
provide monitoring and protection for the microprocessor
and power system. The ISL6218 IC is available in a
38 Ld TSSOP and 40 Ld QFN package.
• User Programmable Switching Frequency of 250kHz to
500kHz
• Pb-Free Plus Anneal Available (RoHS Compliant)
Ordering Information
PART NUMBER
PART MARKING
ISL 6218CV
TEMP. RANGE (°C)
-10 to +85
PACKAGE
38 Ld TSSOP
PKG. DWG #
M38.173
ISL6218CV*
ISL6218CVZ* (Note)
ISL6218CVZA* (Note)
ISL6218CRZ* (Note)
ISL 6218CVZ
ISL 6218CVZ
ISL62 18CRZ
-10 to +85
38 Ld TSSOP (Pb-free)
38 Ld TSSOP (Pb-free)
40 Ld 6x6 QFN (Pb-free)
M38.173
M38.173
L40.6x6
-10 to +85
-10 to +85
*Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel specifications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006, 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.