ISL5571A
®
Data Sheet
J uly 2004
FN4920.5
Acces s High Voltage Switch
Features
The ISL5571A is a solid state device designed to replace the
electromechanical relay used on Subscriber Line Cards. The
device contains two Line Break MOSFET switches, one Ring
Return MOSFET switch and one Ring Access SCR switch.
• Small Size/Surface-Mount Packaging
• Low Impulse Noise, Low EMI
• Clean, Bounce-Free Switching
• Line Break Switches
The ISL5571A is pin-for-pin compatible with the Lucent
L7581AAE LCAS and Clare CPCL7581A Products.
- 0.5Ω Max r
Match
ON
Improvements include: line break switches r
Max) higher dV/dt sensitivity (5000V/µs), protection SCR
match (0.5Ω
ON
- 28Ω Max r
ON
• Built-In Current Limiting, Thermal Shutdown and
Secondary Protection for the SLIC
hold current set to 110mA.
The line break MOSFETs have very low on resistance
(<16.0Ω Typ) and Ron match (<0.05Ω Typ, 0.5Ω Max) and a
blocking voltage >330V. The Ring Return MOSFET has a
typical Ron of 50Ω and a blocking voltage >330V. The
Ringing Access switch is implemented with a SCR device
with a blocking voltage >480V. The SCR switch inherently
offers low EMI connect and disconnect circuitry. All control
I/Os use TTL thresholds making the device compatible with
3V logic.
• Optimized for Short Loop High REN Applications
• 3V/5V Logic-Capable I/O
• Pb-free Available
Applications
• Central Office
• PBX
• DLC
The ISL5571A also includes on-chip protection in the form of
an over-voltage clamping circuit, current-limited MOSFET
switches, and thermal shutdown circuitry. The over-voltage
clamping circuit consists of a diode bridge and SCR.
• HFC
• FITL
• DAML
Ordering Information
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
PART
NUMBER
PROT
SCR
TEMP
RANGE (°C)
PACKAGE
TYPE
PKG.
DWG. #
ISL5571AIB
Yes
Yes
-40 to 85 16 Ld SOIC
M16.3
M16.3
ISL5571AIBZ
-40 to 85 16 Ld SOIC
(Note)
(Pb-free)
• Technical Brief TB379 “Thermal Characterization of
Packages for ICs”
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
• Texas Instruments TISPL758LF3D Data Sheet
• Teccor Electronics Document DO-214AA
Pinout
Add “-T” for tape and reel.
ISL5571A
TOP VIEW
F
1
2
3
4
5
6
7
8
16 V
15 R
14 R
GND
BAT
BAT
LINE
T
BAT
T
LINE
NC
13 NC
12 R
NC
RING
T
11 LATCH
10 INPUT
RING
V
DD
9
D
GND
T
SD
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2001, 2002, 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.