USB 2.0 High/Full Speed Multiplexer
ISL54200
Features
• High Speed (480Mbps) and Full Speed (12Mbps)
Signaling Capability per USB 2.0
The Intersil ISL54200 dual 2:1 multiplexer IC is a single
supply part that can operate from a single 2.7V to 5.5V
supply. It contains two SPDT (Single Pole/Double
Throw) switches configured as a DPDT. The part was
designed for switching between USB High-Speed and
USB Full-Speed sources in portable battery powered
products.
• 1.8V Logic Compatible (2.7V to +3.6V supply)
• Enable Pin to Open all Switches
• -3dB Frequency
- HSx Switches. . . . . . . . . . . . . . . . . . . . .880MHz
- FSx Switches . . . . . . . . . . . . . . . . . . . . .550MHz
The 7Ω normally-closed (NC) FSx switches can swing
rail-to-rail and were specifically designed to pass USB
full speed data signals (12Mbps) that range from 0V to
3.6V. The 4.5Ω normally-open (NO) HSx switches have
high bandwidth and low capacitance and were
specifically designed to pass USB high speed data
signals (480Mbps) with minimal distortion.
• Crosstalk @ 1MHz . . . . . . . . . . . . . . . . . . -70dB
• Off Isolation @ 100kHz . . . . . . . . . . . . . . . -98dB
• Single Supply Operation (V ) . . . . . 2.7V to 5.5V
DD
• Available in Ultra-thin µTQFN and TDFN Packages
• Pb-Free (RoHS Compliant)
The part can be used in Personal Media Players and
other portable battery powered devices that need to
switch between a high-speed transceiver and a full-
speed transceiver while connected to a single USB host
(computer).
Applications*(see page 16)
• MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDA’s
The digital logic inputs are 1.8V logic compatible when
operated with a 2.7V to 3.6V supply. The part has an
enable pin to open all switches. It can be used to
facilitate proper bus disconnect and connection when
switching between the USB sources.
• Digital Cameras and Camcorders
Related Literature*(see page 16)
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”.
The ISL54200 is available in a 10 Ld 3mmx3mm TDFN
and a small 10 Ld 2.1mmx1.6mm µTQFN package. It
operates over a temperature range of -40°C to +85°C.
• Application Note AN1330 “ISL54200EVAL1Z
Evaluation Board User’s Manual”
Application Block Diagram
3.3V
µCONTROLLER
V
DD
ISL54200
LOGIC
EN
4MΩ
IN
VBUS
D-
USB
HIGH-SPEED
TRANSCEIVER
HSD1
HSD2
COMD1
COMD2
USB
FULL-SPEED
TRANSCEIVER
D+
FSD1
FSD2
GND
GND
PORTABLE MEDIA DEVICE
June 17, 2010
FN6408.2
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2007, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.