±16.5kV ESD Protected, +125°C, 3.0V to 5.5V, TDFN
Packaged, 16Mbps, Full Fail-safe, Low Power,
RS-485/RS-422 Receiver
ISL3282EMRTEP
Features
The Intersil ISL3282EMRTEP is a ±16.5kV IEC61000 ESD
protected, 3.0V to 5.5V powered, single receiver that meets both
the RS-485 and RS-422 standards for balanced communication.
This receiver has very low bus currents (+125µA/-100µA), so it
presents a true “1/8 unit load” to the RS-485 bus. This allows up to
256 receivers on the network without violating the RS-485
specification’s 32 unit load maximum and without using
repeaters.
• Specifications per DSCC VID V62/10601-01XB
• Full Mil-Temp Electrical Performance from -55°C to +125°C
• Controlled Baseline with One Wafer Fabrication Site and One
Assembly/Test Site
• Full Homogeneous Lot Processing in Wafer Fab
• No Combination of Wafer Fabrication Lots in Assembly
• Full Traceability Through Assembly and Test by Date/Trace
Code Assignment
Receiver inputs feature a “Full Fail-Safe” design, which ensures a
logic high Rx output if Rx inputs are floating, shorted, or
terminated but undriven.
• Enhanced Process Change Notification
• Enhanced Obsolescence Management
The ISL3282EMRTEP includes an active low enable pin and is
offered in the Military Temperature range (-55°C to +125°C).
• Eliminates Need for Up-Screening a COTS Component
• ±16.5kV IEC61000 ESD Protection on RS-485 Inputs
• Class 3 ESD Level on all Other Pins. . . . . . . . . . . . .>5kV HBM
• Pb-Free (RoHS Compliant)
A 26% smaller footprint is available with the TDFN package. This
device also features a logic supply pin (V ) that sets the V level
L
OH
of the RO output (and the switching points of the RE/RE input) to
be compatible with another supply voltage in mixed voltage
systems.
• Wide Supply Range . . . . . . . . . . . . . . . . . . . . . . . . 3.0V to 5.5V
• Specified for +125°C Operation
• Logic Supply Pin (V ) Eases Operation in Mixed Supply Systems
L
Device Information
• Full Fail-safe (Open, Short, Terminated/Undriven)
The specifications for an Enhanced Product (EP) device are
defined in a Vendor Item Drawing (VID), which is controlled by the
Defense Supply Center in Columbus (DSCC). “Hot-links” to the
applicable VID and other supporting application information are
provided on our website.
• True 1/8 Unit Load Allows up to 256 Devices on the Bus
• High Data Rates . . . . . . . . . . . . . . . . . . . . . . . . . up to 16Mbps
• Low Quiescent Supply Current . . . . . . . . . . . . . . 500µA (Max)
• Very Low Shutdown Supply Current. . . . . . . . . . . 20µA (Max)
• -7V to +12V Common Mode Input Voltage Range
Applications
• Clock Distribution
• Tri-statable Rx Available (Active Low or High EN Input)
• High Node Count Systems
• 5V Tolerant Logic Inputs When V ≤ 5V
CC
• Space Constrained Systems
• Security Camera Networks
• Building Environmental Control/Lighting Systems
• Industrial/Process Control Networks
TABLE 1. SUMMARY OF FEATURES
DATA RATE
(Mbps)
# DEVICES ON
BUS
RX
ENABLE?
QUIESCENT I
(µA)
LOW POWER
SHUTDOWN?
LEAD
COUNT
CC
PART NUMBER
FUNCTION
1 Rx
V PIN?
L
ISL3282EMRTEP
16
256
ACTIVE LOW
YES
350
YES
8-TDFN
February 15, 2011
FN7595.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2010, 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
1